基于驻留时间自适应的电能表RS检测研究  

Study on radiation susceptibility detection of electricity meter based on residence time adaptation

作　　者：裴海琴 薛鹏飞 徐颖妮 Pei Haiqin;Xue Pengfei;Xu Yingni(Shanxi Institute of Metrology,Taiyuan 030032,China;Xi'an Institute of Modern Control Technology,Xi'an 710065,China)

机构地区：[1]山西省计量科学研究院,太原030032 [2]西安现代控制技术研究所十三部,西安710065

出　　处：《电测与仪表》2020年第13期149-152,共4页Electrical Measurement & Instrumentation

基　　金：国家质量监督检验检疫总局科技计划资助项目(2016QK104)。

摘　　要：针对电能表辐射抗扰度(Radiate Susceptibility,RS)试验结果不准确的问题,基于NET Framework平台,使用C#语言设计开发了电能表辐射抗扰度自动检测软件。通过RS 232串口、网口、GPIB等控制接口,将被测电能表、电能表辅助检测模块、辐射干扰模块设备等硬件设备级联,实现电能表辐射抗扰度试验,同时在有电流检测方式下实现驻留时间自动调整和匹配,无电流检测方式下通过数字图形处理的模式实现自动监测电能表故障现象,并记录视频作为回查确认备用。试验结果表明,开发的自动检测系统满足电能表相关标准和规范的要求,可大幅度提高工作效率和数据的准确程度。According to the problem of inaccurate test results of electricity meters in radiation susceptibility test,based on NET Framework platform,the automatic detection software of electricity meter radiation susceptibility is designed and developed using C#language.Through the RS 232 serial port,network port,GPIB and other control interfaces,the hardware devices such as the measured electricity meter,auxiliary detection module,and radiation interference module device are cascaded to realize the radiation susceptibility test of the electricity meter,and the residence time can be automatically matched when there is current,the mode of digital graphics processing is used to automatically monitor the fault of electricity meter when there is no current,and the video is recorded as a check-back confirmation.The test results show that the developed automatic detection system meets the requirements of relevant standards and specifications of the electricity meter,which can greatly improve the work efficiency and the accuracy of the data.

关 键 词：电能表 射频辐射抗扰度 最佳驻留时间 结果评定 自适应 图像识别 

分 类 号：TM933[电气工程—电力电子与电力传动]