Fe (Ⅲ)离子印迹聚合物荧光探针的合成与性能表征  

Synthesis and Characterization of Imprinted Polymer-based Fluorescent Probe for Fe(Ⅲ)

作　　者：张璐 来庆华[1,2] 林春伟 武凯莉 党璐童 康永锋 ZHANG Lu;LAI Qing-hua;LIN Chun-wei;WU Kai-li;DANG Lu-tong;KANG Yong-feng(College of Food Science and Technology,Shanghai Ocean University,Shanghai 201306,China;Shanghai Aquatic Products Processing and Storage Engineering Technology Research Center,Shanghai 201306,China;National Experimental Teaching Demonstration Center for Food Science and Engineering(Shanghai Ocean University),Shanghai 201306,China)

机构地区：[1]上海海洋大学食品学院,上海201306 [2]上海水产品加工及贮藏工程技术研究中心,上海201306 [3]食品科学与工程国家级实验教学示范中心(上海海洋大学),上海201306

出　　处：《塑料工业》2020年第6期164-171,共8页China Plastics Industry

基　　金：国家重点研究发展计划(2018YFD0401304);上海市科委地方院校能力建设项目(N19050502000)。

摘　　要：基于Mn-ZnS量子点(QDs)的荧光特性,以SiO2纳米颗粒作为支撑材料,以三价铁[Fe (Ⅲ)]为模板离子,丙烯酰胺(AM)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,通过沉淀聚合成功制备了新型荧光印迹聚合物(SiO2@QDs@Fe-IIP)。该聚合物显示出优异的荧光特性和选择性,在优化条件下,随着Fe(Ⅲ)浓度的增加,荧光印迹材料的荧光强度呈线性增加,检测的线性范围为2.0~50μmol/L,相关系数R2为0.999 2,且方法的检测限为2.229 nmol/L。同时将其成功应用于自来水样品的检测,三种加标水平下Fe (Ⅲ)的回收率均超过96.51%,相对标准偏差(RSD)低于4.58%。首次将量子点和离子印迹技术相结合用于Fe (Ⅲ)的痕量测定,为后期制备具有高选择性识别能力的聚合物提供了一种新思路。Based on fluorescence characteristics of Mn doped ZnS quantum dots( QDs), the novel fluorescence ion imprinted polymers( SiO2@ QDs@ Fe-IIP) were successfully synthesized on the surface of SiO2 nanoparticles by precipitation polymerization,with Ferric iron [Fe( Ⅲ) ] as template ion,acrylamide( AM) as the functional monomer and ethyl glycol dimethacrylate( EGDMA) as the cross-linker. The prepared SiO2@ QDs @ Fe-IIP shows excellent optical properties and selectivity. Under the optimized experiment conditions,the fluorescence intensity increases linearly with the increasing concentration of Fe( Ⅲ) in the linear range of 2.0 ~ 50.0 μmol/L,with acorrelation coefficient of 0.999 2 and the detection limit of 2.229 nmol/L. Furthermore,the SiO2@ QDs@ Fe-IIP are successfully applied to the analysis of tap water sample,and the average recovery rate of Fe( Ⅲ) at three spiking levels is more than 96.51%,with relative standard deviation( RSD) below 4.58%. This study is the first to combine quantum dots and ion-imprinting techniques for the trace determination of Fe( Ⅲ),which provides a promising strategy to fabricate polymer with highly selective recognition ability.

关 键 词：离子印迹聚合物 量子点 荧光强度 选择性 

分 类 号：TQ325.14[化学工程—合成树脂塑料工业]