检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘如军[1] 马成[1] 施卫[1] 惠兆宇[2] 杭玉桦 Liu Rujun;Ma Cheng;Shi Wei;Hui Zhaoyu;Hang Yuhua(Key Laboratory of Ultra-fast Photovoltaic Technology and Terahertz Science in Shaanxi Province,Department of Applied Physics,Xi’an University of Technology,Xi'an 710048,China;Suzhou Nuclear Power Research Institute,Suzhou 215004,China)
机构地区:[1]西安理工大学应用物理系,陕西省超快光电技术与太赫兹科学重点实验室,陕西西安710048 [2]苏州热工研究院有限公司,江苏苏州215004
出 处:《红外与激光工程》2020年第6期149-153,共5页Infrared and Laser Engineering
基 金:国家自然科学基金(61427814);强脉冲辐射环境模拟与效应国家重点实验室资助项目(SKLIPR1812);江苏省基础科技计划(BK20190187)。
摘 要:纳秒半导体激光器(LD)的时间抖动和多个LD并联触发的时间同步性是各类超快光电过程及应用中的重要参数。研究了纳秒脉冲LD(包括LD触发电路)的时间抖动特性以及2个LD的触发同步性。结果表明:纳秒LD(包括LD触发电路)的时间抖动与其驱动电路的驱动电压有关,均在亚纳秒量级范围。单只纳秒LD的时间抖动为72 ps,当1个LD驱动电路同时触发2个并联的纳秒LD时,每个纳秒LD的时间抖动增至约200 ps,2个并联纳秒LD的触发时间同步性近300 ps。The time jitter of nanosecond semiconductor laser(LD)and the time synchronization of multiple LD parallel triggers are important parameters in various ultra-fast photoelectric processes and applications.In this paper,the time jitter characteristics of nanosecond pulse LD(with driving circuits)and the synchronization of two nanosecond LD triggers were studied.The results show that the time jitter of nanosecond LD(with driving circuits)is related to the voltage of driving circuits and is in the range of sub-nanoseconds.The time jitter of a single nanosecond LD is 72 ps,when a driving power supply simultaneously triggers two nanoseconds LD in parallel,the time jitter of each nanosecond LD increases to about 200 ps,and the time synchronization of two parallel nanosecond LD is about 300 ps.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15