热连粗轧机支持辊剥落影响因素的有限元分析  

Finite Element Analysis of the Factors Influencing the Spalling of the Support Roll in Hot Continuous Roughing Mill

作　　者：秦备荒 杨志亮 QIN Beihuang;YANG Zhiliang(Guangdong Hailiang Copper Co.,Ltd.,Taishan 529200;Kemelon Precision Copper Strip(Henan)Co.,Ltd.,Xinxiang 453000)

机构地区：[1]广东海亮铜业有限公司,台山529200 [2]凯美龙精密铜板带(河南)有限公司,新乡453000

出　　处：《现代制造技术与装备》2020年第6期75-76,共2页Modern Manufacturing Technology and Equipment

摘　　要：基于现有的剥落和磨损,分析2250轧机支持辊边部发生剥落的因素,采用数值计算与实测数据,建立三维有限元模型和辊系力学仿真。结果表明:接触疲劳是支持辊辊面剥落的主要因素,为有效预防支持辊的剥落和控制磨损提供了理论指导。Based on the existing spalling and wear,the factors of spalling on the support roll edge of 2250 rolling mill are analyzed,and the three-dimensional finite element model and roll system mechanical simulation are established by using numerical calculation and measured data.The results show that the contact fatigue is the main factor of the back-up roll spalling,which can effectively prevent the back-up roll spalling and control the wear.

关 键 词：热轧 轧辊 磨损 剥落 有限元建模 

分 类 号：TG333.17[金属学及工艺—金属压力加工]