BIM技术下综合管线施工扬尘污染的控制方法研究  

Research on Control Method of Dust Pollution in Comprehensive Pipeline Construction under BIM Technology

作　　者：刘红霞[1] 何静[1] 徐明霞[1] Liu Hongxia;He Jing;Xu Mingxia(Shanxi Institute of Technology, Xi'an 710300, China)

机构地区：[1]陕西国防工业职业技术学院,陕西西安710300

出　　处：《环境科学与管理》2020年第7期115-118,共4页Environmental Science and Management

基　　金：陕西国防工业职业技术学院科研计划项目:BIM技术在综合管线施工质量控制中的应用研究(Gfy19-23)。

摘　　要：现有综合管线施工扬尘污染控制方法的控制效果较差,在处理后扬尘污染浓度值仍然较高,为解决上述问题,设计一种利用BIM技术进行综合管线施工,并降低施工扬尘污染的控制方法。利用BIM技术可视化施工过程,真实模拟施工管线。通过因子分析法构建扬尘控制模型,最后构建评价模型,对控制模型进行判定。运用BIM技术的综合管线施工扬尘污染控制模型收敛性好,控制后的污染物浓度值较低,证明此次设计的方法具有较好的控制效果,能够满足综合管线施工扬尘污染的控制要求。Existing integrated pipeline construction dust pollution control methods have poor control effects.After treatment,the concentration of dust pollution is still high.In order to solve the above problems,a comprehensive pipeline construction using BIM technology is designed to reduce control method.It uses BIM technology to visualize the construction process and realistically simulate the construction pipeline.The dust control model was constructed by factor analysis method,and finally the evaluation model was constructed to judge the control model in this paper.The experimental results show that the integrated pipeline construction dust pollution control model using BIM technology has good convergence and low concentration of pollutants after control,which proves that the design method has better control effect and can meet the requirements control requirements.

关 键 词：BIM技术 综合管线施工 扬尘污染控制 污染浓度 

分 类 号：X51[环境科学与工程—环境工程]