P-25在塑胶粒子脱水上的实验研究及展望  

Experiment Research and Prospect of P-25 in Plastic Particle Dehydration

作　　者：章伟达 ZHANG Wei-da(Zhejiang Qingji Industry Co.,Ltd.,Hangzhou 311401,China)

机构地区：[1]浙江轻机实业有限公司,浙江杭州311401

出　　处：《盐科学与化工》2020年第6期38-41,共4页Journal of Salt Science and Chemical Industry

摘　　要：针对双级推料离心机在某塑胶粒子进行脱水分离时残余含湿率≤45%的要求,通过对影响残余含湿率的两个重要参数着手,对不同的转速和推料次数进行了实验,依据实验结果及实验现象进行了研究分析,最后通过对离心加速盘和锥筛网结构的实验应用,实验结果满足了残余含湿率<45%。同时对双级推料离心机在塑胶粒子脱水分离上的提出了展望。Aiming at the requirement of solid residual moisture content≤45%when a plastic particle is dehydrated and separated by a two-stage pusher centrifuge,two important parameters affecting the solid residual moisture content are studied,and experiments are carried out for different rotating speeds and pusher times.Based on the experimental results and experimental phenomena,research and analysis are carried out.Finally,through the experimental application of the centrifugal acceleration disk and the cone screen structure,the experiment is carried out the results showed that the residual moisture content of solid is less than 45%.At the same time,the prospect of the two-stage pusher centrifuge in the dehydration and separation of plastic particles is put forward.

关 键 词：双级推料离心机 分离因素 离心加速盘 锥筛网 

分 类 号：TH122[机械工程—机械设计及理论] TQ051.8[化学工程]