检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王莅晟 伊鹏 谷允捷 江逸茗 WANG Lisheng;YI Peng;GU Yunjie;JIANG Yiming(Institute of Information Technology,PLA Strategic Support Force Information Engineering University,Zhengzhou 450002,China)
机构地区:[1]中国人民解放军战略支援部队信息工程大学,信息技术研究所,郑州450002
出 处:《计算机工程》2020年第8期203-209,共7页Computer Engineering
基 金:国家重点研发计划“基于自适应网络平台的动态防御技术”(2018YFB0804002)。
摘 要:针对软件定义网络中数据平面三态内容寻址存储器(TCAM)性能受限导致的流表下发拥塞问题,提出一种基于流重定向的多协议标签交换算法。利用源节点交换机流重定向和路径交换机下放MPLS标签的方法,占用部分数据链路带宽来缓解TCAM更新流表速率过慢的情况,同时增大系统容量。实验结果表明,与传统OSPF算法相比,该算法可以减小60%的链路负载和近90%的流表项插入延时,并能够增加最多200%的系统容量。To address the congestion of flow table distribution caused by limited performance of data plane Ternary Content Addressable Memory(TCAM)in Software-Defined Network(SDN),this paper proposes a Multi-Protocol Label Switching(MPLS)algorithm based on flow redirection.The algorithm utilizes the flow redirection method of the source node switch and the MPLS label decentralization method of the path switch,and occupies a part of the data link bandwidth to alleviate the problem that the flow table update rate of TCAM is too low.Also,the system capacity is increased.Experimental results show that compared with the traditional OSPF algorithm,the proposed algorithm reduces the link load by up to 60%and the insertion delay of flow table items by nearly 90%,while increasing the system capacity by up to 200%.
关 键 词:软件定义网络 控制链路 流量优化 流重定向 多协议标签交换
分 类 号:TP311[自动化与计算机技术—计算机软件与理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.116