转轴支座零件注塑模具设计  

Design of Injection Mold for Rotary Shaft Support Parts

作　　者：范蓉 刘华刚[3] Fan Rong;Liu Huagang(Tianjin University of Technology and Education,Tianjin 300222,China;Tianjin the First Commercial School,Tianjin 300180,China;Beijing Polytechnic,Beijing 100176,China)

机构地区：[1]天津职业技术师范大学,天津300222 [2]天津市第一商业学校,天津300180 [3]北京电子科技职业学院,北京100176

出　　处：《工程塑料应用》2020年第8期99-102,共4页Engineering Plastics Application

摘　　要：介绍了一种转轴支座零件的塑料注射模具设计过程。在分析零件结构特征和产量要求的基础上,对比了四种不同的分型面设计,并从中选择了一种各方面性能最优的解决方案。模具采用一模两件结构,零件侧面O型环和异形凸起特征分别采用侧抽芯机构和主分型面开模的成型方式,解决了开模顶出中可能出现的脱模干涉问题。在成型零件十字销特征的深槽位置,成型部件设计了镶件结构,既缓解了模具充填过程中的排气问题,又可降低模仁的加工难度,改善其加工工艺性。生产实践检验表明,该模具结构紧凑合理,成型产品性能稳定。The process of the plastic injection mold design for the rotary shaft support parts was introduced.Based on the analysis of structural characteristics and production requirements of parts,four different parting surface designs were compared,and the optimal solution was selected,which was the best one in all aspects.The“one mold two pieces”structure was determined.The side core-pulling mechanism and main parting surface were adopted respectively,to form the O-ring and the lugs on the part side,which solved the problem of the mold release interference.The insert structure was used at the deep groove position of the cross pin,which could relieve the problem of filling and exhausting effectively,reduce the processing difficulty of the core and improve its machining technology.Through the production practice,it is proved that the mold structure is compact and reasonable,and the product performance is steady.

关 键 词：转轴支座 一模两件 脱膜干涉 十字销 镶件 

分 类 号：TQ320.66[化学工程—合成树脂塑料工业]