检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:韩建平[1,2] 张鸿宇 安鹏强 HAN Jianping;ZHANG Hongyu;An Pengqiang(Key Laboratory of Disaster Prevention and Mitigation in Civil Engineering of Gansu Province, Lanzhou University of Technology, Lanzhou 730050, China;Western Engineering Research Center of Disaster Mitigation in Civil Engineering of Ministry of Education, Lanzhou University of Technology, Lanzhou 730050, China;Lanzhou Branch, Changzheng Engineering Co., Ltd., Lanzhou 730010, China)
机构地区:[1]兰州理工大学甘肃省土木工程防灾减灾重点实验室,甘肃兰州730050 [2]兰州理工大学西部土木工程防灾减灾教育部工程研究中心,甘肃兰州730050 [3]航天长征化学工程股份有限公司兰州分公司,甘肃兰州730010
出 处:《世界地震工程》2020年第3期19-26,共8页World Earthquake Engineering
基 金:国家自然科学基金(51578273);教育部长江学者和创新团队发展计划(IRT_17R51)。
摘 要:基于环境激励下结构动力响应信号分析与处理识别结构的模态参数,是结构健康监测和损伤诊断的一个重要环节,目前为止,要得到较为可靠的识别结果仍有一定困难,尤其是模态阻尼比。基于自然激励技术和傅里叶变换的时移特性,提出了一种新的结构模态阻尼比估算方法,通过理论推导和仿真算例验证了该方法的可行性,进而利用一刚构-连续组合梁桥在环境激励下的动力测试数据,通过该方法对其阻尼比进行了识别,并将识别结果与数据驱动随机子空间法的识别结果进行了对比。结果表明:提出的方法可以减轻噪声影响,得到可接受的识别结果,可为大型工程结构阻尼比的识别提供一个方便和有效的途径。Identification of structural modal parameters via processing the dynamic response signals under ambient excitation is an important procedure for structural health monitoring and damage diagnosis.Up to now,it is still difficult to obtain very reliable identification results,especially for modal damping ratios.Therefore,a new approach was proposed for identifying structural modal damping ratios based on Natural Excitation Technique(NExT)and time-shifting property of Fourier Transform(FT)in this paper.First,the feasibility of this approach is verified by theoretical derivation and numerical simulation.Then,the modal damping ratios of a rigid frame-continuous girders bridge were identified based on the dynamic test results under ambient excitation by the proposed approach and data-driven stochastic subspace identification(SSI-DATA),respectively.Comparison of the identification results indicates that the proposed approach is capable to alleviate the noise effect and obtain the favorable results.It can provide a convenient and efficient way to identify the damping ratios of large-scale engineering structures.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.130