检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈健[1] 吴国民[1] 霍淑平[1] 孔振武[1] CHEN Jian;WU Guomin;HUO Shuping;KONG Zhenwu(Institute of Chemical Industry of Forest Products,CAF,National Engineering Lab. for Biomass Chemical Utilization,Key Lab. of Chemical Engineering of Forest Products,National Forestry and Grassland Administration,Key Lab. of Biomass Energy and Material,Jiangsu Province,Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,Nanjing 210042, China)
机构地区:[1]中国林业科学研究院林产化学工业研究所,生物质化学利用国家工程实验室,国家林业和草原局林产化学工程重点实验室,江苏省生物质能源与材料重点实验室,江苏省林业资源高效加工利用协同创新中心,江苏南京210042
出 处:《林产化学与工业》2020年第4期41-46,共6页Chemistry and Industry of Forest Products
基 金:中央级公益性科研院所基本科研业务费专项资金资助项目(CAFYBB2016MA007)。
摘 要:由腰果壳液中提取的腰果酸与环氧氯丙烷反应合成了腰果酸环氧树脂-Ⅰ(EACA-Ⅰ),再进一步侧链环氧化得到腰果酸环氧树脂-Ⅱ(EACA-Ⅱ),并采用HPLC、FT-IR和NMR表征了两种环氧树脂的化学结构。EACA-Ⅰ和EACA-Ⅱ的环氧值分别为3.7和6.0 mmol/g,25℃时黏度分别为80和300 mPa·s。采用差示扫描量热(DSC)仪和热重分析(TGA)仪,对环氧树脂与甲基六氢邻苯二甲酸酐(MeHHPA)和异佛尔酮二胺(IPDA)的固化反应特性和固化物耐热性能进行了探讨。研究结果表明:这两种环氧树脂与MeHHPA的固化过程放热缓和,而与IPDA的固化过程放热剧烈;与MeHHPA的固化物具有较好的热稳定性能,起始分解温度大于371.6℃,失重峰温417.5℃。The anacardic acid based epoxy resin type-Ⅰ(EACA-Ⅰ)was synthesized by the reaction of anacardic acid(ACA)obtained from cashew nut shell liquid(CNSL)and epichlorohydrin.Then,the side chain oxidation of EACA-Ⅰwas carried out to form the anacardic acid based epoxy resin type-Ⅱ(EACA-Ⅱ).The chemical structure of the epoxy resins was characterized by HPLC,FT-IR and NMR.The epoxy values of EACA-Ⅰand EACA-Ⅱwere 3.7 mmol/g and 6.0 mmol/g,and the viscosities at 25℃were 80 and 300 mPa·s,respectively.The characterization of curing reaction and heat resistance of the cured products obtained from the reaction of epoxy resins with tetrahydromethyl-1,3-isobenzofurandione(MeHHPA)and isophorondiamine(IPDA)were investigated by DSC and TGA,respectively.The results showed that the heat release of the curing process of the anacardic acid based epoxy resins with MeHHPA was moderate.However,the heat release of the curing process of anacardic acid based epoxy resin with IPDA was intense;the cured products obtained from the reaction of the anacardic acid based epoxy resins with MeHHPA showed good thermal stability with the initial temperature of degradation more than 371.6℃and the peak temperature of weight loss at 417.5℃.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.222.32.191