辛置煤矿2-208工作面深孔动压注水防尘技术研究  

Application research of water injection and dust prevention technology in 2-208 working face of Xinzhi Mine

作　　者：张强 Zhang Qiang(Xinzhi Mine,Huozhou Coal-Electricity Group,Huozhou 031412,China)

机构地区：[1]霍州煤电集团辛置煤矿,山西霍州031412

出　　处：《煤炭与化工》2020年第7期116-118,122,共4页Coal and Chemical Industry

摘　　要：针对辛置煤矿2-208综采工作面粉尘产出量大,且不易控制的难题,提出了深孔动压注水降尘控制技术,分析了煤层注水机理并确定了注水钻孔布置方式。研究结果表明,煤层超前深孔动压注水可提前湿润煤层,降低粉尘产生量及飞扬能力,注水后工作面粉尘及呼吸性粉尘平均浓度分别减小为注水前的24.8%和28.8%。In view of the difficulty of large and difficult control of dust production in 2-208 fully mechanized coal mining face, the control technology of deep hole dynamic pressure water injection was put forward, the mechanism of coal seam water injection was analyzed and the layout of water injection borehole was determined. The results showed that dynamic pressure water injection can wet coal seam in advance and reduce dust production and flying capacity. The average concentration of dust and respirable dust on the working face was decreased to 24.8% and 28.8% respectively after water injection.

关 键 词：采煤工作面 动压注水 钻孔布置 防尘降尘 

分 类 号：TD714[矿业工程—矿井通风与安全]