检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黎和俊 刘盛翔 史文谱[1] LI He-jun;LIU Sheng-xiang;SHI Wen-pu(School of Electro-mechanical and Automotive Engineering,Yantai University,Yantai 264005,China)
机构地区:[1]烟台大学机电汽车工程学院,山东烟台264005
出 处:《烟台大学学报(自然科学与工程版)》2020年第3期373-378,共6页Journal of Yantai University(Natural Science and Engineering Edition)
基 金:国家自然科学基金资助项目(11672301).
摘 要:胶接梁在工程实际中有广泛应用,其应力和变形分析是其结构可靠性设计的重要依据,而其胶接层的剪切破坏又是其主要破坏形式之一.本文利用材料力学假设和方法研究了胶接悬臂梁在端部纯弯矩作用下的变形问题和胶接层内剪切应力的分布问题,并通过算例说明了不同材质组合下梁的轴向变形、挠度变形和胶接层剪切应力分布的变化规律,结果表明,当胶接梁上下两部分材质不一致时,胶接层内剪切应力并不为零,且主要分布在梁悬垂端附近,这与单一材质梁纯弯曲的结果是不一样的.The hypotheses and the methods used in material mechanics are applied to study the deformation of the glued beam and the shearing stress in the glue,and an example is employed to show variations of the axial deformation and the deflection and the shearing stress in the glue of the beam with different combinations.The numerical results show that the shearing stress is not zero when the combinations of the beam are not the same one,and different from that of the pure bending of the beam with single combination,mainly distributes near the hanging end of the beam.
关 键 词:胶接悬臂梁 纯弯曲 材料力学 变形 胶层剪切应力
分 类 号:TH113[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222