极低密度聚乙烯热收缩膜的性能分析  

Analysis of Ultra Low-density Polyethylene for Heat Shrinkable Film

作　　者：吴双[1] 姜艳峰 李瑞[1] 葛腾杰[1] 王玉如 Wu Shuang;Jiang Yanfeng;Li Rui;Ge Tengjie;Wang Yuru(Daqing Chemical Research Center of Petrochemical Research Institute,CNPC, Daqing,Heilongjiang, 163714)

机构地区：[1]中国石油天然气股份有限公司研究院大庆化工研究中心,黑龙江大庆163714

出　　处：《现代塑料加工应用》2020年第4期31-33,共3页Modern Plastics Processing and Applications

摘　　要：采用茂金属催化剂自制了用于热收缩膜的极低密度聚乙烯(VLDPE),并选取典型的同类进口产品,针对基本物理性能、分子链结构及聚集态结构进行对比分析。结果表明:自制的VLDPE密度小于0.915 g/cm^3,与进口VLDPE相比,自制VLDPE的力学性能更优异,且其共聚单体含量高,相对分子质量分布宽,主链上含有较多短支链,提高了VLDPE产品耐撕裂性能和抗冲击性能。An ultra low density polyethylene(VLDPE)for heat shrinkable film was prepared by metallocene catalyst.The basic physical properties,molecular chain structure and aggregate structure of VLDPE and two imported products were compared and analyzed.The results show that the density of selfmade VLDPE is less than 0.915 g/cm^3,and the mechanical properties of it are better compared with imported VLDPE.The selfmade VLDPE copolymer has higher monomer content,wider relative molecular mass distribution and more short branched chains in the main chain,which improve the tear resistance and impact resistance of VLDPE products.

关 键 词：极低密度聚乙烯 热收缩薄膜 相对分子质量分布 分子链 

分 类 号：TQ3[化学工程]