检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邓婷 李容 徐奕 DENG Ting;LI Rong;XU Yi(School of Materials and Energy,University of Electronic Science and Technology of China,Chengdu 610054,China)
机构地区:[1]电子科技大学材料与能源学院,四川成都610054
出 处:《电子元件与材料》2020年第8期54-58,共5页Electronic Components And Materials
摘 要:为了探究造成碳氢树脂基板介电性能不稳定的原因,采用溶液共混法制备了聚1,2-丁二烯(1,2-PB)/苯乙烯-丁二烯-苯乙烯(SBS)/三元乙丙橡胶(EPDM)三元共混物。用DSC、凝胶含量测定和FT-IR对含有不同类型EPDM及BIPB用量的共混物的固化反应进行了研究。对共混物的介电性能进行了测试和分析。研究结果表明:不同种类的EPDM对三元共混物介电稳定性影响不大;BIPB含量为0.85 phr,三元共混物介电常数和介电损耗都非常不稳定,而增加BIPB用量,三元共混物介电稳定性增加。当BIPB用量增加到3.4 phr,f=10 GHz,1,2-PB/SBS/EPDM-1三元共混物的相对介电常数和介电损耗分别为2.42和0.0033,而且非常稳定。To study the dielectric instability of hydrocarbon resin substrates,1,2-polybutadiene(1,2-PB)/styrene-butadiene-styrene triblock copolymer(SBS)/ethylene-propylene-diene monomer(EPDM)ternary blends was prepared by solution blending method.The curing reaction of blends containing different types of EPDM and amounts of BIPB was studied by DSC,gel content test and FT-IR.The dielectric properties of the blends were tested and studied.Results show that the type of EPDM has little effect on the dielectric stability of the ternary blends.When the BIPB content is 0.85 phr,the dielectric constant(ε′)and loss(ε″)of the ternary blends are very unstable,and the stability increases with the BIPB content.When the content of BIPB increases to 3.4 phr,theε′andε″of 1,2-PB/SBS/EPDM-1 ternary blends are 2.42 and 0.0033 at f=10 GHz respectively,which both have high stability.
关 键 词:碳氢树脂 1 2-PB/SBS/EPDM三元共混物 介电稳定性 交联密度 高频应用
分 类 号:TN304[电子电信—物理电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.170