检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郑晓国[1] 刘晓燕[2] ZHENG Xiaoguo;LIU Xiaoyan(Road and Bridge School,Zhejiang Institute of Communications,Hangzhou 311112,China;Chang an University,Xi an 710064,China)
机构地区:[1]浙江交通职业技术学院路桥学院,杭州311112 [2]长安大学,西安710064
出 处:《路基工程》2020年第4期106-111,共6页Subgrade Engineering
基 金:国家自然科学基金资助项目(41672294)。
摘 要:抗滑桩在滑坡治理及边坡支护方面得到广泛应用,但在抗滑桩实际设计中,很多技术人员并未将桩前土体抗力纳入考虑机制,仅考虑滑坡推力的影响,导致材料用量大幅增多。为此,以云南某公路边坡工程作为研究对象,基于ABAQUS有限元软件对考虑和忽略桩前土体抗力两种不同情况下抗滑桩内力进行了研究,深入分析了黏聚力、内摩擦角与桩前土体坡度对抗滑桩内力的影响。结果表明:当桩前土体抗剪参数相同,桩前土体坡度越大,边坡土与抗滑桩横向位移越大;当桩前土体坡度超过40°,桩前土体抗力对边坡抗滑产生显著作用,此时边坡抗滑桩设计时必须将其作为设计考虑因素。Anti-slide pile is widely used in landslide control and slope support,however,in the practical design,the soil resistance before pile does not taken into account,but landslide thrust considered only,which leads to substantial increase in consumption of the material.Herein the slope engineering of a highway in Yunnan Province was taken as the object to study with ABAQUS finite element software the internal force of anti-slide pile on the condition of considering and ignoring the soil resistance before pile,furthermore,to analyzed deeply the effects of cohesion,internal friction angle and soil slope before pile thereon.The results show that,in case of the same shear parameter of soil mass before pile,the larger the soil slope before pile,the larger the lateral displacement of the soil and the anti-slide pile;when the soil slope before pile is larger than 40°,the soil resistance before pile may work perfectly with slide resistance of slope,thus must be taken into consideration in the design of anti-slide pile.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.202