壳聚糖再生纤维预处理及打浆性能研究  

Study on Chitosan Regenerated Fiber Pretreatment and Beating Performance

作　　者：汪继明 张思晗 赵光磊[1] WANG Jiming;ZHANG Sihan;ZHAO Guanglei(Stale Key Laboratory of Pulp and Paper Engineering,South China University of Technology,Guangzhou 510640,China)

机构地区：[1]华南理工大学制浆造纸国家重点实验室,广东广州510640

出　　处：《造纸科学与技术》2020年第3期54-59,共6页Paper Science & Technology

摘　　要：以壳聚糖再生纤维为研究对象,改变预处理条件和打浆,通过观察纤维形貌和成纸性能,对壳聚糖再生纤维的造纸性能进行评估。研究结果表明,碱液预处理使壳聚糖再生纤维直径增大6 um左右,提高了纤维的分丝帚化率;打浆提高了壳聚糖再生纤维成纸的机械性能,打浆转数在30000 r时成纸性能最优。Taking chitosan regenerated fiber as the research object,changing pretreatment conditions and beating,the papermaking performance of chitosan regenerated fiber was evaluated by observing the fiber morphology and paper-forming performance.The results of the study showed that the alkali pretreatment increased the diameter of the chitosan regenerated fiber by about 6μm,which increased fiber fibrillation.Beating improved the mechanical properties of the paper,the paper performance was the best when the beating revolution was 30000 r/min.

关 键 词：壳聚糖再生纤维 预处理 打浆 成纸性能 

分 类 号：TS722[轻工技术与工程—制浆造纸工程]