基于Qt的无人机监视雷达显控终端设计与实现  

Design and implementation of display and control terminal of UAV surveillance radar based on Qt

作　　者：陈丽朝 Chen Lichao(Chengdu Zhongdian Jinjiang Information Industry Co.,Ltd.,Chengdu 610000,China)

机构地区：[1]成都中电锦江信息产业有限公司,四川成都610000

出　　处：《无线互联科技》2020年第12期3-5,共3页Wireless Internet Technology

摘　　要：雷达的目标显示及控制终端作为雷达系统的重要组成部分,是操作员和雷达系统的交互平台。文章首先对无人机监视雷达显控终端的功能需求进行综合分析,提出软硬件系统设计方案。作为系统设计的重要内容,控终端软件采用模块化设计,包括雷达目标的PPI显示模块、雷达控制模块、红外摄像模块、精确打击系统模块、BIT显示模块、系统设置和日志模块。其次,完成通信模块设计,实现显控终端与雷达主机之间的网口通信、显控终端与打击系统之间的网口通信。最后,进行系统联调,充分验证显控终端系统设计的正确性。As an important part of radar system,radar target display and control terminal is the interactive platform between operator and radar system.Firstly,this paper analyzes the function requirements of UAV surveillance radar display and control terminal,and puts forward the design scheme of software and hardware system.As an important part of system design,the control terminal software adopts modular design,including PPI display module of radar target,radar control module,infrared camera module,precision strike system module,bit display module,system setting and log module.Secondly,complete the design of communication module,realize the network port communication between the display control terminal and the radar host,display control terminal network port communication between end and strike system.Finally,the system adjustment is carried out to fully verify the correctness of the design of the display control terminal system.

关 键 词：雷达显控终端 像素密度显示 无人机监视 红外摄像 

分 类 号：TN95[电子电信—信号与信息处理] V279[电子电信—信息与通信工程]