大口径厚壁90°弯头液压成形工艺与成形规律研究  

Study on hydroforming technology and law of large diameter and thick wall 90° elbow

作　　者：王守东 纪开盛 岳晓露 WANG Shoudong;JI Kaisheng;YUE Xiaolu(Henan Shenzhou Precision Manufacturing Co.,Ltd.,Xinxiang 453731,Henan China;School of Materials Science and Engineering,Shenyang Aerospace University,Shenyang 110136,Liaoning China)

机构地区：[1]河南神州精工制造股份有限公司,河南新乡453731 [2]沈阳航空航天大学材料科学与工程学院,辽宁沈阳110036

出　　处：《锻压装备与制造技术》2020年第4期89-93,共5页China Metalforming Equipment & Manufacturing Technology

摘　　要：对大口径厚壁90°弯头液压成形工艺过程进行有限元模拟,分析不同加载路径对大口径厚壁90°弯头液压成形效果的影响规律,并对大口径厚壁90°弯头壁厚进行分析。结果表明:通过数值模拟计算确定了500mm大口径厚壁90°弯头液压成形工艺参数。零件成形后,零件最大减薄率为34.691%,随着变形量的增加零件壁厚总体呈现出减薄的趋势,零件内弯壁厚要高于外弯。在零件外弯最高处壁厚小于其周围壁厚,并且零件最高处变形量小于其周围区域。The hydroforming process of 90° elbow with large diameter and thick wall has been simulated by finite element method, and the influence law of different loading paths on the hydroforming effect of 90° elbow with large diameter and thick wall has been analyzed. The results show that the hydroforming parameters of large diameter 500 mm thick wall 90° elbow have been determined by numerical simulation. The maximum thinning rate of the part is 34.691% after being formed. With the increase of deformation, the wall thickness of the part show a trend of thinning, and the inner bending wall thickness of the part is higher than the outer bending. The wall thickness at the highest part of outer bending is less than that around it,and the deformation at the highest part is less than that around it.

关 键 词：液压成形 数值模拟 90°弯头 加载路径 壁厚分布 

分 类 号：TG394[金属学及工艺—金属压力加工]