水泥新型干法生产线粉磨系统的研究及选择  

Research and selection of grinding system for new-type cement dry process production line

作　　者：吴永强 刘建寿[2] 祖大磊 WU Yongqiang;LIU Jianshou;ZU Dalei(Suzhou Sinoma Construction Co.,Ltd,Kunshan 215300,Jiangsu,China;Luoyang Institute of Science&Technology,Luoyang 471023,Henan,China)

机构地区：[1]苏州中材建设有限公司,江苏昆山215300 [2]洛阳理工学院,河南洛阳471023

出　　处：《矿山机械》2020年第8期39-43,共5页Mining & Processing Equipment

摘　　要：对新型水泥干法生产线几个典型的粉磨系统进行了对比研究,得出了单独球磨机粉磨系统、预粉磨系统、联合粉磨系统和半终粉磨系统的电耗逐渐降低的结论。对于相同的水泥粉磨系统,适当增加辊压机与球磨机的装机功率比,可以降低系统电耗,增加产量;半终粉磨系统比联合粉磨系统增加了需水量。这些研究结果有利于水泥行业的节能降耗。The paper compared and studied several typical grinding system for new-type cement dry process production line,and obtained the conclusion that the power consumption of single ball mill grinding system,pre-grinding system,combined grinding system and semi-final grinding system gradually reduced.For the same cement grinding system,modest increase in the installation power ratio of roller press and ball mill reduced the power consumption of the system and enhanced the output,and the water demand of the semi-final grinding system increased compared with the combined grinding system.The research results were beneficial to energy saving and consumption reduction of cement industry.

关 键 词：水泥生产线 预粉磨 联合粉磨 半终粉磨 

分 类 号：TQ172.632[化学工程—水泥工业]