检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李银伟 卢护林 刘俊豪 魏维伟 LI Yinwei;LU Hulin;LIU Junhao;WEI Weiwei(School of Optical‐Electrical and Computer Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China;Shanghai Radio Equipment Research Institute,Shanghai 201109,China)
机构地区:[1]上海理工大学光电信息与计算机工程学院,上海200093 [2]上海无线电设备研究所,上海201109
出 处:《上海航天(中英文)》2020年第4期40-47,共8页Aerospace Shanghai(Chinese&English)
基 金:国家自然科学基金资助项目(41601508);上海市自然科学基金资助项目(15ZR1439500,16ZR1434900,17ZR1428700)。
摘 要:针对星载方位向扫描模式合成孔径雷达(Synthetic Aperture Radar,SAR)系统中天线无法实现连续扫描而引入成对回波的问题,提出了波束跃度对SAR成像质量影响的定量化分析方法。提出了一种广义的SAR成像几何模型,以模式因子区分不同的方位向扫描模式;结合傅里叶级数和泰勒级数展开推导了波束跃度下的方位向天线方向图,在此基础上建立了方位向回波信号模型;得到成对回波幅度和位置与波束跃度的定量关系,着重比较分析了波束跃度对不同方位向扫描模式SAR图像质量的影响。仿真结果验证了上述分析方法的有效性。In terms of the problem of paired echoes in Synthetic Aperture Radar(SAR)images due to that antenna beams in SAR system cannot continuously scan the illuminated scenes,a quantitative analysis method for the effects of antenna beam granularity on the quality of SAR images is presented.First,a generalized SAR imaging model is proposed to distinguish different azimuth scanning modes with the mode factors.Second,based on Fourier series and Taylor series expansion,an antenna pattern formula in azimuth is derived with the azimuth antenna beam granularity,and thus an azimuth echo signal model of spaceborne azimuth scanning mode SAR is established.Finally,the quantitative relationship of the amplitudes and positions of paired-echoes and the antenna beam granularity is achieved,and the effects of beam granularity on the SAR image quality of different azimuth scanning modes are compared and analyzed emphatically.The simulation results verify the validity of the above analysis methods.
关 键 词:合成孔径雷达 方位向扫描模式 波束跃度 模式因子 成对回波
分 类 号:TN959.74[电子电信—信号与信息处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.171