航空有机玻璃钻孔加工工艺研究  

Research on Drilling Process of Aero Plexiglass

作　　者：王启超 姜东晓 李佳望 陈礼文 苏鼎彝 WANG Qichao;JIANG Dongxiao;LI Jiawang;CHEN Liwen;SU Dingyi(CETC WuHu Diamond Aircraft Manufacture Co.,Ltd.,Wuhu 241000)

机构地区：[1]中电科芜湖钻石飞机制造有限公司,芜湖241000

出　　处：《现代制造技术与装备》2020年第7期153-154,共2页Modern Manufacturing Technology and Equipment

摘　　要：从航空有机玻璃加工工艺入手,通过分析不同钻孔工艺条件下孔的龟裂率、表面粗糙度以及位置偏差3类数据,研究影响制孔合格率的因素,并通过仿真找出数据差异原因,以寻求有机玻璃钻孔的最佳工艺。In this paper,starting from the processing technology of aero plexiglass,by analyzing the crack rate,surface roughness and position deviation of holes under different drilling conditions,the factors affecting the pass rate of hole making were studied,and the reasons for the data differences were found through simulation,so as to seek the best drilling technology of plexiglass.

关 键 词：有机玻璃 钻孔 转速 龟裂率 粗糙度 孔位偏差 

分 类 号：V26[航空宇航科学与技术—航空宇航制造工程]