检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王斌 罗晓宇 王琛 周晓蕊 胡颖晖 房二鑫 WANG Bin;LUO Xiaoyu;WANG Chen;ZHOU Xiaorui;HU Yinghui;FANG Erxin(School of Materials Science&Engineering,Xi’an Polytechnic University,Xi’an 710048,China)
出 处:《材料导报》2020年第18期18159-18164,共6页Materials Reports
基 金:陕西省教育厅重点科学研究计划项目(20JY027);中国纺织工业联合会科技指导性项目(2018062);国家级大学生创新创业训练项目(201810709037);陕西省重点研发计划项目(2020NY-154)。
摘 要:以锆改性酚醛树脂为碳源,纳米Al 2O 3粒子为增强相,酚醛空心微球为闭孔微球相,利用压塑成型-碳化工艺制备纳米Al 2O 3粒子增强碳泡沫复合材料。通过扫描电子显微镜(SEM)、万能试验机和热氧化炉研究了纳米Al 2O 3粒子含量对碳泡沫复合材料的微观结构、压缩和弯曲性能及抗氧化性能的影响。结果表明,纳米Al 2O 3粒子的加入使得基体与微球界面变粗糙,二者结合更紧密;当纳米Al 2O 3粒子的质量分数为10%时,碳泡沫复合材料的压缩强度和比压缩强度均达到最大值,分别为18.53 MPa和37.82 MPa·cm 3·g-1,较改性前分别提高了97%和61.41%;而纳米Al 2O 3粒子的加入并没有明显改善碳泡沫复合材料的弯曲性能;当纳米Al 2O 3粒子的质量分数为15%时,碳泡沫的抗氧化性能最好;700℃等温氧化30 min,失重为28.15%。Al 2O 3 nanoparticles reinforced carbon foam composites,with zirconium modified phenolic resin as origin of carbon,Al 2O 3 nanoparticles as reinforcement,and phenolic hollow microspheres as closed phase,were prepared by the process of compression molding and carbonization.The effects of the amount of Al 2O 3 nanoparticles on the microstructure,compression and bending properties,and oxidation resistance of carbon foam composites were investigated by SEM,universal testing machine and thermal oxidation furnace,respectively.Results showed that Al 2O 3 nanoparticles induced the rough interface between the matrix and the microspheres,making them more tightly bonded.When the amount of Al 2O 3 nanoparticles was 10wt%,the compressive strength and specific compressive strength both reached the maximum,18.53 MPa and 37.82 MPa·cm 3·g-1,respectively.Compared to pure carbon foam,the compressive strength and specific compressive strength of modified carbon foam increased by 97%and 61.41%,respectively.While the addition of Al 2O 3 nanoparticles did not improve the bending properties significantly.When the content of Al 2O 3 nanoparticles is 15wt%,the oxidation resistance performance shows the best;the weight loss is 28.15%during the isothermal oxidation,at 700℃for 30 min.
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49