检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李松 赵毅强 叶茂 LI Song;ZHAO Yiqiang;YE Mao(School of Microelectronics,Tianjin University,Tianjin 300072,China;Tianjin Key Laboratory of Imaging and Sensing Microelectronic Technology,Tianjin 300072,China)
机构地区:[1]天津大学微电子学院,天津300072 [2]天津市成像与感知微电子技术重点实验室,天津300072
出 处:《北京航空航天大学学报》2020年第8期1601-1609,共9页Journal of Beijing University of Aeronautics and Astronautics
摘 要:为了在集成电路可测试性设计(DFT)中实现更有效的测试向量压缩,减少测试数据容量和测试时间,采用嵌入式确定性测试(EDT)的扫描测试压缩方案分别对S13207、S15850、S38417和S38584基准电路进行了优化分析,通过研究测试向量和移位周期等影响测试压缩的因素,提出了固定测试端口和固定压缩率的扫描测试压缩电路优化方法。结果表明,在测试端口数量都为2,压缩率分别为12、14、16和24时具有较好的压缩效果,与传统自动测试向量生成(ATPG)相比,固定故障的测试数据容量减小了3.9~6.4倍,测试时间减少了3.8~6.2倍,跳变延时故障的测试数据容量减少了4.1~5.4倍,测试时间减少了3.8~5.2倍。所提方法通过改变测试端口数和压缩率的方式讨论了多种影响测试压缩的因素,给出扫描测试压缩电路的优化设计方案,提高了压缩效率,并对一个较大规模电路进行了仿真验证,可适用于集成电路的扫描测试压缩设计。To realize test patterns compression more efficient in integrated circuit Design for Test(DFT),and reduce test data volume and test time,the S13207,S15850,S38417 and S38584 benchmark circuits were analyzed using Embedded Deterministic Test(EDT)scan test compression scheme.By studying the factors that affect test compression such as test patterns and shift cycles,a scan test compression circuit optimization method was proposed with constant test ports and constant compression ratios.The results show that the benchmark circuits have a good compression effect when the number of test ports was set to 2 and the compression ratio was set to 12,14,16 and 24 respectively.Compared with the traditional Automatic Test Pattern Generation(ATPG),stuck-at faults test data volume was reduced by 3.9-6.4 times,and test time was reduced by 3.8-6.2 times;transition faults test data volume was reduced by 4.1-5.4 times,and test time was reduced by 3.8-5.2 times.By changing the number of test ports and compression ratios,this method discusses various factors that affect test compression and gives an optimized scheme for the scan test circuit compression design.It improved the efficiency of the scan compression test.This method was verified in a large-scale circuit,and the result shows that it can be applied to the design of integrated circuit scan test compression.
关 键 词:可测试性设计(DFT) 扫描测试压缩 测试数据容量 测试时间 嵌入式确定性测试(EDT) 自动测试向量生成(ATPG)
分 类 号:TN47[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38