水工模型钢结构框架的制作安装与应用优势  

Construction, Installation and Application Advantages of Hydraulic Model Steel Structure Frame

作　　者：尹辉 耿凡坤 李江峰 戚印鑫 Yin Hui;Geng Fankun;Li Jiangfeng;Qi Yinxin(Xinjiang Institute of Water Resources and Hydropower Research,Urumqi 830049,Xinjiang)

机构地区：[1]新疆水利水电科学研究院,新疆乌鲁木齐830049

出　　处：《陕西水利》2020年第8期176-178,182,共4页Shaanxi Water Resources

基　　金：新疆维吾尔自治区公益性科研院所业务经费资助项目(KY2019088)。

摘　　要：长期以来,在水工模型试验领域,其模型制作主要是采用砖混砌筑、板材粘接的方法。该方法制作工艺相对简单,参数精度控制相对较难,模型制作成型一旦出现缺陷,只能采用局部拆除进行重做修正。依据长期的工作实践经验,我们提出采用钢结构框架与板材组合的方法制作水工模型。该方法能有效解决模型制作的精度控制问题,可适度实现模型组件单件标准化和简单模块化。对于局部模型或断面模型,特别是标准断面模型,是非常适用的方法。结合一项采用钢结构框架与板材组合的模型制作情况,着重介绍钢结构框架的施工方法、工艺要求以及使用优势。For a long time,in the field of hydraulic model test,the model making mainly adopts the methods of brick masonry and plate bonding.This method is relatively simple and difficult to control the precision of parameters.Once there is a defect in the model,it can only be redone by partial demolition.Based on the long-term working experience,we put forward the method of combining steel frame and plate to make hydraulic model.The method can effectively solve the problem of precision control of model making and realize the standardization and simple modularization of model components.It is a very suitable method for local model or section model,especially for standard section model.In this paper,the construction method,process requirements and advantages of steel structure frame are introduced in detail.

关 键 词：水工试验 钢结构框架 制作安装 优势 

分 类 号：TV34[水利工程—水工结构工程]