竖向加劲薄钢板剪力墙的抗侧性能研究  

Investigation of lateral-resistant behaviour of thin steel plate shear walls with vertical stiffeners

作　　者：王应生[1] 贾贵强 王先铁[1] 谢川东 梁旭东 WANG Yingsheng;JIA Guiqiang;WANG Xiantie;XIE Chuandong;LIANG Xudong(School of Civil Engineering,Xi′an Univ.of Arch.&Tech.,Xi′an 710055,China)

机构地区：[1]西安建筑科技大学土木工程学院,陕西西安710055

出　　处：《西安建筑科技大学学报（自然科学版）》2020年第4期495-504,共10页Journal of Xi'an University of Architecture & Technology(Natural Science Edition)

基　　金：国家自然科学基金资助项目(51108369,51678474);陕西省自然科学基金资助项目(2018JM5065)。

摘　　要：分析了竖向加劲薄钢板剪力墙的受力和变形,提出了考虑加劲肋贡献的竖向加劲薄钢板剪力墙的抗侧刚度,以及考虑屈曲后强度的竖向加劲薄钢板剪力墙的抗侧承载力计算公式.构建梁柱铰接足尺模型进行有限元分析.公式计算结果与有限元结果对比表明:抗侧刚度及抗侧承载力计算值与有限元结果吻合较好;竖向加劲肋的设置提高了薄钢板剪力墙的弹性屈曲应力,考虑屈曲后强度的竖向加劲薄钢板剪力墙的抗侧承载力应包含弹性屈曲荷载和屈曲后强度的贡献.竖向荷载会降低竖向加劲薄钢板剪力墙的抗侧刚度和抗侧承载力,增大加劲肋数量可显著减小竖向荷载对竖向加劲薄钢板剪力墙抗侧刚度的影响,增大加劲肋截面积对其影响较小.In this paper,the mechanical behaviour and deformation of the thin steel plate shear wall with vertical stiffeners(SPSW-VS)were studied.The formulas of lateral stiffness with the contribution of stiffeners and lateral-resistant capacity of thin SPSW-VS considering post-buckling strength were obtained.Then the finite element analysis of full-scale models with pinned boundary connections was conducted,followed by comparison works.It is indicated that the predicted lateral stiffness and lateral-resistant capacity consisting buckling strength and post-buckling strength agree well with the numerical analysis results.An introduction of vertical stiffeners would increase the elastic buckling stress of the thin SPSW-VS.Moreover,vertical load would decrease the lateral stiffness and lateral-resistant capacity of the thin SPSW-VS,but this effect would be reduced significantly when increasing the number of stiffeners rather than the area of the stiffeners.

关 键 词：竖向加劲 薄钢板剪力墙 抗侧刚度 抗侧承载力 竖向荷载 

分 类 号：TU391[建筑科学—结构工程]