检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:付晓强 杨仁树 刘纪峰[1,2] 张会芝[1,2] 张仁巍[1,2] FU Xiaoqiang;YANG Renshu;LIU Jifeng;ZHANG Huizhi;ZHANG Renwei(School of Civil Engineering,Sanming University,Sanming 365004,Fujian,China;Key Laboratory of Engineering Material&Structure Reinforcement in Fujian Province College,Sanming University,Sanming 365004,Fujian,China;School of Civil and Resources Engineering,University of Science and Technology Beijing,Beijing 100083,China)
机构地区:[1]三明学院建筑工程学院,福建三明365004 [2]三明学院工程材料与结构加固福建省高等学校重点实验室,福建三明365004 [3]北京科技大学土木与资源工程学院,北京100083
出 处:《爆炸与冲击》2020年第9期98-110,共13页Explosion and Shock Waves
基 金:三明学院引进高层次人才科研启动经费(18YG13)。
摘 要:冻结立井爆破过程中,近区监测信号中含有的基线漂零及噪声成分对其局部特征精细化提取影响显著。在对近区井壁振动信号有效采集基础上,通过互补总体经验模态分解(complementary ensemble empirical mode decomposition,CEEMD)方法、稀疏化基线估计消噪(baseline estimation and de-noising with sparsity,BEADS)方法和隐马尔可夫模型消噪(hidden Markov model de-noising,HMMD)方法等,解决了信号中基线漂移和随机噪声消除难题,并采用交叉小波变换对校正和消噪效果进行了相关性评价。实例分析结果表明:信号中缓变的基线成分遍历信号各个模态分量的整个过程,且主要集中于低频分量中,而噪声则集中在高频分量。组合分析方法对低频基线漂零和高频噪声的处理效果好,是一种高效且相对保幅的信号分析方法,可用于批量信号数据的预处理过程。In the process of freezing vertical shaft blasting,the baseline drift and noise in the near area monitoring signal have significant influence on the fine extraction of local characteristics.On the basis of effective acquisition of shaft lining vibration signals in near field of blasting,complementary ensemble empirical mode decomposition(CEEMD)method,baseline estimation and de-noising with sparsity(BEADS)method and hidden Markov model de-noising(HMMD)method and so on are used to solve the problem of baseline drift and random noise elimination in the signal,and the correlation evaluation of correction and noise elimination effect is carried out by cross wavelet transform(CWT).The analysis results show that:the slowly changing baseline component in the signal exists the whole process of each modal component,and it is mainly concentrated in the low frequency component,while the noise is concentrated in the high frequency component.The combined analysis method can deal with low frequency baseline drift and high frequency noise effectively.It is an efficient and relatively amplitude-preserving signal analysis method,and can be used to preprocess of batch blasting vibration signal data.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7