钒钛海砂矿转底炉直接还原研究  

Study on Direct Reduction of Sea Sand Ore Containing Vanadium and Titanium by Rotary Hearth Furnace

作　　者：刘长正 曹志成 彭程 崔慧君 LIU Changzheng;CAO Zhicheng;PENG Cheng;CUI Huijun(RHF Business Division, Baowu Group Environmental Resources Technology Co., Ltd., Shanghai 201900, China)

机构地区：[1]宝武集团环境资源科技有限公司转底炉事业部,上海201900

出　　处：《矿产保护与利用》2020年第4期52-57,共6页Conservation and Utilization of Mineral Resources

摘　　要：针对印尼钒钛海砂选矿后的精矿,采用转底炉直接还原—电炉熔分工艺,先后完成了小型基础试验研究和中试试验。得到最佳的条件是,m(海砂精矿):m(兰炭):m(膨润土):m(有机粘结剂)=100:25:3:1,含碳球团3层(54 mm),还原温度1260℃,还原时间30 min,中试得到球团平均金属化率88.63%,球团中剩碳4.81%。将金属化球团热装入300 kVA的直流电炉进行冶炼,得到含钒铁水,铁水中铁品位96.25%,钒品位0.443%,铁与钒回收率分别为99.64%和88.96%,炉渣中TiO2品位38.86%,钛回收率为98.95%。结果表明,转底炉直接还原—电炉熔分处理海砂精矿技术上可行。For the concentrate of Indonesian sand mine containing vanadium and titanium,the process of direct reduction by rotary hearth furnace and melting separation by electric furnace was adopted to complete the small-scale basic test and the pilot test successively.The metallized pellets could be obtained with the average metallization rate of 88.63%and carbon content of 4.81%by pilot test under the conditions of the mixed material ratio of the sea sand concentration,semi-coke,bentonite and organic binder at the ratio of 100:25:3:1,the thickness of containing coal pellets of 3 layers(54 mm),rotary hearth furnace roasting temperature of 1260℃,reduction time of 30 minutes.Then the hot metallized pellets were fed into a 300 kVA electric furnace for smelting.The iron containing V could be obtained with TFe grade of 96.25%,iron recovery of 99.64%,V grade of 0.443%and V recovery of 88.96%.The grade of TiO2 in slag is 38.86%,and the recovery of titanium is 98.95%.The results showed that the technology of direct reduction by RHF and melting by electric furnace was feasible.

关 键 词：转底炉 钒钛海砂矿 直接还原焙烧 电炉熔分 

分 类 号：TF559[冶金工程—钢铁冶金]