检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:苗润源 程淑杰[1] 梁安定[1] 梁争峰[1] MIAO Runyuan;CHENG Shujie;LIANG Anding;LIANG Zhengfeng(Xi’an Modern Chemistry Research Institute, Xi’an 710065, China)
出 处:《兵器装备工程学报》2020年第8期154-157,共4页Journal of Ordnance Equipment Engineering
基 金:国防基础预研项目(62035)。
摘 要:通过采用数值模拟以及试验方法,对不同具有药型罩结构的周向多线形爆炸成型弹丸的成型结果进行了研究,得到了在不同药型罩压垮速度条件下不同周向的成型结果。数值模拟和战斗部试验结果表明,药型罩顶点与边缘的轴向速度梯度是弹丸成型后弹丸长度的主要影响因素,并存在轴向速度梯度最优值;而径向压垮速度梯度是成型弹丸压合度的主要影响因素。Forming results of circumferential MLEFP(multiple linear explosively formed penetrators)with different liner’s configurations were studied by methods of numerical simulate and trial,and different circumferential MLEFP forming results were obtained.The numerical calculation and trial results showed that axial collapse velocity gradient between liner vertex and edge is the main influence factor that affects projectiles’length,and the optimal value exists.Also the radial collapse velocity gradient is the main influence factor that affects the projectiles’compression degree.
关 键 词:周向多线形爆炸成型弹丸 药型罩 轴向速度梯度 径向速度梯度 成型结果
分 类 号:TJ414[兵器科学与技术—火炮、自动武器与弹药工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249