Ⅱ级生物安全柜在结核病实验室中的检测及报告要求  

Testing and reporting requirements for Class Ⅱ biosafety cabinet in tuberculosis laboratory

作　　者：张灿有[1,2] 夏辉 成君[1] ZHANG Canyou;XIA Hui;CHENG Jum(Natiomal Center for Tuberculowis Control and Prrentiom,Chinese Center for Disase Comtrol and Prevention.Beijing 102206.China;Ph.D candidate from Peking Un iversity School of Public Health)

机构地区：[1]中国疾病预防控制中心结核病预防控制中心,北京102206 [2]北京大学公共卫生学院

出　　处：《中国防痨杂志》2020年第9期903-909,共7页Chinese Journal of Antituberculosis

基　　金：中美新发与再发传染病合作项目结核病项目(719031);中国疾病预防控制中心科研项目(021807)。

摘　　要：生物安全柜是保障实验室生物安全的一级防护屏障之一,在结核病实验室中也被广泛应用。我国在生物安全柜使用方面存在不重视使用维护、现场检测及检测报告不规范等问题。笔者结合国内外生物安全柜标准和自身现场工作实践经验,简要概述其现场检测和日常检测的要求和注意事项,并且对检测报告进行具体示例。希望为实验室工作人员和专业检测机构提供一定参考。The biosafety cabinet is one of the primary barriers to ensure the biological safety of the laboratories,and has been used in tuberculosis laboratory widely.In China,there are problems in the use of biosafety cabinets,such as the lack of attention to maintenance,irregular on-site testing and test reports.Based on international and domestic biosafety cabinet standards and the authors’ on-site experiences,this article briefly summarizes the requirements and points for attention of on-site and daily testing of biosafety cabinets,and also provides model essay of test report,in order to help laboratories staff and special testing institutions.

关 键 词：生物安全柜 实验室 结核 安全管理 规范 技术报告 评论 

分 类 号：R52[医药卫生—内科学]