基于NX的LGMazak—NEXUS 250-ⅡML型车削中心后处理的开发  

Development of LGMazak-NEXUS 250-Ⅱ ML Turning Center Post-processing Based on NX

作　　者：殷业财 马丽梅 单希林 张剑锋 隋金玲 YIN Yecai;MA Limei;SHAN Xilin;ZHANG Jianfeng;SUI Jinling(Institution of Engineers,Beijing Institute of Petrochemical Technology,Beijing 102617,China)

机构地区：[1]北京石油化工学院工程师学院,北京102617

出　　处：《北京石油化工学院学报》2020年第3期26-30,42,共6页Journal of Beijing Institute of Petrochemical Technology

基　　金：北京石油化工学院重点教改项目(SZZD20181201,ZDFSGG20191201)。

摘　　要：为了有效地开发车削中心的后处理技术,挖掘其巨大潜力,采用NX/Post Builder后处理器构建技术,结合机床本身的结构特点、主要参数、主要编程指令和已准备好的刀具轨迹,对车削中心的后处理技术进行了研究。结果表明,利用该方法开发此类机床后处理便捷、快速,通过实际上机验证,结果完全正确,实现了此类机床后置处理的高效开发。In order to effectively develop the post-processing technology of turning center and tap its huge potential,the post-processing technology of turning center is studied by using NX/post builder post-processor construction technology,combining with the structural characteristics,main parameters,main programming instructions and prepared tool path of the machine tool itself.The results show that it is convenient and fast to use this method to develop the post-processing of this kind of machine tool,and the results are completely correct through the actual computer verification,which realizes the efficient development of the post-processing of this kind of machine tool.

关 键 词：NX 车削中心 后处理 编程指令 

分 类 号：TM16[电气工程—电工理论与新技术]