插齿加工时去毛刺研究  

Study on Deburring Process during Gear Shaping

作　　者：乔凌云 卢宇 陈晓莉 邹雨 Qiao Lingyun;Lu Yu;Chen Xiaoli

机构地区：[1]宜昌长机科技有限责任公司,湖北宜昌443000

出　　处：《机械制造》2020年第9期65-66,共2页Machinery

摘　　要：对变速箱盘形齿轮进行插齿加工时,齿底端面产生的毛刺要由机床自动去除。针对这一要求,对插齿加工时的去毛刺问题进行了研究。在研究中,分析了盘形齿轮零件的特征和去毛刺动作路径,并在此基础上设计了去毛刺机构。应用去毛刺机构,可以降低工人的劳动强度,满足自动去除毛刺的要求。The burrs generated at the end face of the tooth bottom need to be automatically removed by the machine tool when the disc gear in the gearbox is subjected to gear shaping.Aiming at this requirement the deburring process during gear shaping was studied.In the study,the characteristics of the disc gear part and the deburring path were analyzed,and the deburring mechanism was designed based on this.The application of deburring mechanism can reduce the labor intensity and satisfy the requirement of automatic deburring.

关 键 词：插齿加工 零件 毛刺 

分 类 号：TH162[机械工程—机械制造及自动化]