弹性黏结磁性磨料设计制造及抛光性能的研究  

Research on Design,Fabrication and Polishing Properties of Elastic Bonded Magnetic Abrasives

作　　者：杨震宇 吕玉山[1] 邸寒旭 宋征 YANG Zhen-yu;LV Yu-shan;DI Han-xu;SONG Zheng(School of Mechanical Engineering,Shenyang Ligong University,Shenyang 110159,China;Liaoning Electric Power Center Hospital,Shenyang 110000,China)

机构地区：[1]沈阳理工大学机械工程学院,沈阳110159 [2]辽宁电力中心医院,沈阳110000

出　　处：《组合机床与自动化加工技术》2020年第10期44-46,50,共4页Modular Machine Tool & Automatic Manufacturing Technique

基　　金：国家自然科学基金(51875368)。

摘　　要：为提高磁力抛光的加工效果,设计一种以微钢珠为载体,弹性胶为黏结剂,白刚玉微粉为磨粒的磁性磨料,研究其中微钢珠、弹性胶和白刚玉微粉质量配比,黏结剂的选择以及工件转速对抛光性能的影响。结果表明:弹性黏结磁性磨料能够实现对调质45号钢表面的有效抛光,磨料中微钢珠、黏结剂和白刚玉微粉质量比为12:1:4时能获得更好的抛光效果,聚氨酯胶作为黏结剂是可行的,高的转速能更好的抛光工件表面。In order to improve the processing effect of magnetic polishing,a magnetic abrasive was designed with micro steel balls as the carrier,elastic rubber as the binder and white corundum micropowder as the abrasive particles.The influence of three factors on polishing performance were studied,which were mass ratio of micro steel ball,elastic rubber and white corundum micropowder in magnetic abrasive,the choice of binder and the influence of workpiece rotation speed.The experimental results show that the elastic bonded magnetic abrasive can effectively polish the surface of the quenched and tempered 45 steel.The best polishing effect can be obtained when the mass ratio of micro steel ball,binder and white fused alumina powder in the abrasive is 12:1:4.Adhesives are feasible,and high rotational speeds can better polish the surface of the workpiece.

关 键 词：磁性磨料 磁力抛光 黏结法 表面粗糙度 

分 类 号：TH16[机械工程—机械制造及自动化] TG506[金属学及工艺—金属切削加工及机床]