检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘朋 龚延风[1] 田国华[2] 缪正坤[2] LIU Peng;GONG Yanfeng;TIAN Guohua;MIAO Zhengkun(College of Civil Engineering,Nanjing Tech University,Nanjing 221000,China;School of Construction Management,Jiangsu Vocational Institute of Architecture Technical,Xuzhou 221000,China)
机构地区:[1]南京工业大学土木工程学院,江苏南京221000 [2]江苏建筑职业技术学院建筑管理学院,江苏徐州221000
出 处:《新型建筑材料》2020年第10期132-135,168,共5页New Building Materials
基 金:江苏省建设系统科技项目(2018ZD147);江苏建筑节能与建造技术协同创新中心项目(SJXTBS1713)。
摘 要:以装配式建筑墙板使用要求和相关技术规范为依据,提出了泡沫混凝土配合比设计性能指标:干密度小于700 kg/m3,抗压强度≥3.5 MPa,导热系数小于0.18 W/(m·K)。通过正交试验研究了发泡剂、SiO2气凝胶、纤维掺量及水胶比4种因素对该泡沫混凝土性能的影响,并采用矩阵分析法对配合比进行优化,优化后相关指标均满足设计要求。Based on the requirements of the assembled wallboard and the relevant technical specifications,the performance index of foam concrete mix design was proposed,that is,the dry density was less than 700 kg/m3,the compressive strength was 3.5 MPa and above,and the thermal conductivity was less than 0.18 W/(m·K).Four factors and four levels test scheme of foam content,water-binder ratio,aerogel content and fiber content were established by orthogonal test method.The influence of various factors on performance indexes was analyzed,finally,matrix analysis method was used to optimize the mix ratio,and all the optimized indexes met the design requirements.
关 键 词:泡沫混凝土 SIO2气凝胶 正交试验 配合比优化
分 类 号:TU528.2[建筑科学—建筑技术科学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13