一种机械增压器的逆向改型设计  

A Reverse Modified Design of a Mechanical Supercharger

作　　者：莫锦涛 方浩宇[1,2] 李长香[1,2] 陈训刚[1,2] 段春辉[1,2] 邓朝俊 张安锐 罗英[1,2] MO Jin-tao;FANG Hao-yu;LI Chang-xiang;CHEN Xun-gang;DUAN Chun-hui;DENG Chao-jun;ZHANG An-rui;LUO Ying(Science and Technology on Reactor System Design Technology Laboratory,Chengdu 610213,China;Nuclear Power Institute of China,Chengdu 610213,China)

机构地区：[1]中国核动力研究设计院核反应堆系统设计技术重点实验室,成都610213 [2]中国核动力研究设计院,成都610213

出　　处：《科学技术与工程》2020年第28期11586-11590,共5页Science Technology and Engineering

摘　　要：为了增加某高原重载车采用的机械增压器流量,提出了一种叶轮改型设计方法。该方法将叶轮叶片型线沿流动方向分为两段,靠进口的一段保持不变,靠出口的一段则根据叶片出口角度,将叶片扭转角度作为均布载荷,保证在叶轮径向方向上,叶轮型线的几何角度增加速度相等。利用该方法,完成了不同叶片出口角的叶轮设计,并建立了有限元计算模型。计算结果表明,当增大叶片出口角度,机械增压器流量会显著提高,但是当出口角度大于90°,流量增加不明显,且压比对流量变化很敏感,叶片载荷增加。A method of impeller design was presented to increase the flow rate of the supercharger used in a plateau heavy-duty vehicle.In this method,the impeller blade profile was divided into two sections along the flow direction.The blade torsion angle remained unchange at the section at the inlet,while its angle was twisted as the uniform load according to the blade outlet angle at the section at the outlet,so as to ensure that the geometric angle of the impeller profile increasing with same speed in the radial direction of the impeller.By this method,the impeller design of different blade outlet angles was completed,and the finite element model was established.The calculation results show that when the blade outlet angle increases,the flow rate of the supercharger will increase significantly.But when the outlet angle is greater than 90°,the flow rate increases slightly,the pressure ratio is very sensitive to the flow rate change,and the blade load increases.

关 键 词：机械增压器 有限元 叶片出口角 改型设计 

分 类 号：TK203.61[动力工程及工程热物理—动力机械及工程]