管状织物结构件的研制及渗透性测试  

Development of Tubular Fabric Structural Part and Its Permeability Test

作　　者：朱红[1] 赵为陶[1] 周赵蓓 ZHU Hong;ZHAO Weitao;ZHOU Zhaobei(Changzhou Vocational Institute of Textile and Garment,Jiangsu Changzhou,213164;Changzhou Key Laboratory of Ecological Textile Technology,Jiangsu Changzhou,213164)

机构地区：[1]常州纺织服装职业技术学院,江苏常州213164 [2]常州市生态纺织技术重点实验室,江苏常州213164

出　　处：《棉纺织技术》2020年第11期5-9,共5页Cotton Textile Technology

基　　金：常州市生态纺织技术重点实验室项目资助(常科发〔2018〕187号)。

摘　　要：总结管状织物结构件的制备技术,并测试其渗透性能。以聚酯长丝为经、纬纱,制备了4种管状织物;介绍了4种管状织物的组织结构设计、上机图和制备技术要点等。测试了各试样不同部位的孔径;设计了渗透性试验。结果显示:透孔组织部分渗透率最大,其次是纱罗组织部分,平纹组织部分渗透率最小;纱罗织物组织稳定,渗透率比较稳定。认为:平纹+纱罗组织能较好地满足填充和渗透性要求。The preparation technology of tubular fabric structural part was summarized,and its permeability was tested.Polyester filaments were used as warp and weft.Four kinds of tubular fabrics were prepared.The texture design,looming draft,key preparation technology of the four tubular fabrics and so on were introduced.The pore diameter in different position of the parts were tested.The permeability test was designed.The test results showed that the permeability of mock leno weave part was the largest,the leno weave was the next,and the plain weave was the smallest.The texture of leno fabric was stable.The permeability was relatively stable.It is considered that plain weave+leno weave can well meet the requirements of filling and permeability.

关 键 词：管状织物 透孔组织 纱罗组织 孔径 渗透性 产业用纺织品 医疗保健功能 

分 类 号：TS106.67[轻工技术与工程—纺织工程]