含聚碳化二亚胺的高固含量聚酯型聚氨酯分散体的合成与表征  

Synthesis and Characterization of High Solid Content Polyester Polyurethane Dispersions Containing Polycarbodiimide

作　　者：田仪长 孙东成[1] Yichang Tian;Dongcheng Sun(School of Chemistry and Chemical Engineering,South China University of Technology,Guangzhou 510640,China)

机构地区：[1]华南理工大学化学与化工学院,广东广州510640

出　　处：《高分子材料科学与工程》2020年第9期40-45,共6页Polymer Materials Science & Engineering

基　　金：国家自然科学基金资助项目(51673073)。

摘　　要：以四甲基苯二甲基二异氰酸酯(TMXDI)为原料合成了聚碳化二亚胺(PCDI),然后以PCDI、聚己二酸丁二醇酯二醇(PBA)、六亚甲基二异氰酸酯(HDI)与异佛尔酮二异氰酸(IPDI)、乙二胺基乙磺酸钠(AAS-Na)、异佛尔酮二胺(IPDA)为原料合成了固含量50%以上的聚氨酯分散体(PUD)。利用傅里叶变换红外光谱表征了N=C=N的结构;PUD的ξ电位处于-46^-62 mV,分散体稳定性能优异;透射电镜显示,分散体胶粒呈现大小不一的球形结构。含PCDI嵌段的聚酯型聚氨酯其耐水解性和力学性能都得到显著提升。研究对比发现,PCDI的最佳聚合度为4,PCDI的最佳质量分数为3%。Polycarbodiimide(PCDI)was synthesized with tetramethylxylylene diisocyanate(TMXDI).Then polyurethane dispersions(PUD)with the solid content above 50%was prepared with polycarbodiimide(PCDI)based on tetramethylxylylene diisocyanate(TMXDI),polybutylene adipate diol(PBA),hexamethylene diisocyanate(HDI)and isophorone diisocyanate(IPDI),sodium ethylenediamine sulfonate(AAS-Na),isophorone diamine(IPDA).The structure of N=C=N was confirmed by FI-IR;the zeta potential of PUD is between-46 mV and-62 mV,and the stability of the dispersion is excellent;the transmission electron microscopy(TEM)results show that the dispersion colloidal particles exhibit spherical structures with different sizes.The polyester polyurethane containing PCDI has a significant improvement in hydrolysis resistance and mechanical properties.The comparison shows that the best polymerization degree of PCDI is 4,the optimum mass fraction of PCDI is 3%.

关 键 词：聚碳化二亚胺 聚酯型聚氨酯 耐水解性能 

分 类 号：TQ323.8[化学工程—合成树脂塑料工业]