方形微通道热沉的[火积]耗散优化分析  

Entransy dissipation theory optimization analysis of square microchannel heat sink

作　　者：吉亚萍 云和明[1] 耿文广 李萌 于仓仓 陈宝明[1] JI Yaping;YUN Heming;GENG Wenguang;LI Meng;YU Cangcang;CHEN Baoming(School of Thermal Energy Engineering,Shandong Jianzhu University,Jinan 250101,Shandong,China;Energy Institute,Qilu University of Technology(Shandong Academy of Sciences),Shandong Provincial Key Laboratory of Biomass Gasification Technology,Jinan 250014,Shandong,China)

机构地区：[1]山东建筑大学热能工程学院,山东济南250101 [2]齐鲁工业大学(山东省科学院),山东省科学院能源研究所,山东省生物质气化技术重点实验室,山东济南250014

出　　处：《化工学报》2020年第S02期166-175,共10页CIESC Journal

摘　　要：基于CFD软件建立了两种不同结构的方形微通道热沉,并对其进行数值计算,模拟得到热沉的温度场和压力场。在此基础上,研究了不同微通道分布方式、不同质量流率和不同热通量对热沉的温度、压降的影响,同时基于耗散理论对比分析来获得方形微通道热沉换热效果较好的优化方案,在固定边界热流条件下,耗散越小,换热效果越好。计算结果表明:随着质量流率的增大,热沉温度逐渐降低,进出口压差逐渐增大,PEC逐渐增大,[火积]耗散逐渐减小;随着热通量的增大,热沉温度逐渐升高,进出口压差逐渐降低,PEC逐渐增大,耗散逐渐减小。微通道分布方式为上层内切圆半径-下层外接圆半径分布时热沉的温度更低,PEC更大,耗散更小,传热效率更高。Two kinds of square microchannel heat sinks with different structures were established based on CFD software,and numerical calculations were carried out to simulate the temperature field and pressure field of the heat sink.On this basis,the effects of different microchannel distribution patterns,different mass flow rates and different heat fluxes on the temperature and pressure drop of the heat sink are studied.At the same time,based on the comparison analysis of the entransy dissipation theory,a better optimization scheme of heat sink in square microchannel is obtained.A better optimization scheme,under the fixed boundary heat flow condition,the smaller the entransy dissipation,the better the heat exchange effect.The calculation results show that with the increase of mass flow rate,the heat sink temperature gradually decreases,the pressure drop increases gradually,the PEC gradually increases,and the entransy dissipation decreases;as the heat flux density increases,the heat sink temperature gradually increases,the pressure drop gradually decreases,the PEC gradually increases,and the entransy dissipation gradually decreases.The microchannel distribution pattern is the upper inscribed circle radiuslower layer circumcircle radius distribution,the temperature of the heat sink is lower,the PEC is larger,the entransy dissipation is smaller,and the heat transfer efficiency is higher.

关 键 词：微通道 热沉 CFD 电子元件冷却 [火积]耗散 优化 

分 类 号：TK124[动力工程及工程热物理—工程热物理]