检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:武永和 林志敏[1,2] 刘树山 张永恒[1,2] 王良璧 WU Yonghe;LIN Zhimin;LIU Shushan;ZHANG Yongheng;WANG Liangbi(School of Mechanical Engineering,Lanzhou Jiaotong University,Lanzhou 730070,Gansu,China;Key Laboratory of Railway Vehicle Thermal Engineering,Ministry of Education,Lanzhou 730070,Gansu,China)
机构地区:[1]兰州交通大学机电工程学院,甘肃兰州730070 [2]铁道车辆热工教育部重点实验室,甘肃兰州730070
出 处:《化工学报》2020年第S02期176-186,共11页CIESC Journal
基 金:国家自然科学基金项目(51676093,51566007);甘肃省杰出青年基金项目(1506RJDA061)。
摘 要:内插扰流元件是一种可操作性强的管内强化传热方式,其强化传热机理主要是在管内诱导产生了二次流。在均匀壁温热边界条件下,对内插不同形状涡产生器管内层流流动与传热特性进行了数值分析。研究发现:在扭带基础上裁去部分面积相同的条件下,管内插等腰梯形涡产生器的换热能力最强,直角梯形涡产生器次之,矩形涡产生器的换热能力最差,管壁上的局部Nusselt数的峰值所在圆周位置及其大小与涡产生器形状有关,而不同形状的涡产生器对管内流动的阻力系数影响较小。插入涡产生器后,管内二次流强度参数Se和平均Nusselt数Nu均随Reynolds数Re的增大而增大,二者随Reynolds数Re的变化规律具有一致性。平均Nusselt数Nu与二次流强度参数Se呈幂函数相关,内插涡产生器管内的二次流强度决定了其对流换热强度。Placing twisted inserts into tubes is a common method of high maneuverability to enhance tube side heat transfer.The mechanism of heat transfer enhancement is mainly to induce secondary flow by twisted inserts in the tube.Under a uniform wall temperature(UWT)thermal boundary condition,the laminar flow and heat transfer characteristics in a circular tube inserting different twisted vortex generators are numerically studied.It is found that when the geometric area of material cut from the traditional twisted tape to form different vortex generator inserts is identical,the tube-side heat transfer capability that inserting the isosceles trapezoidal vortex generators is the best,followed by that of the right-angle trapezoidal vortex generators,and the circular tube inserting rectangular vortex generators has the worst heat transfer capacity.The peak value of the local Nusselt number on the tube wall and its circumferential position is related to the shape of the vortex generator.However,the influence of the shape of vortex generators on the tube-side resistance coefficient is small.For the studied cases of different vortex generators placed inside a circular tube,both the secondary flow intensity parameter Se and the averaged Nusselt number Num increase with the increase of Reynolds number,and the law of their change with Re are close to consistent.The averaged Nusselt number Num is related to the secondary flow intensity parameter Se as a power function.The intensity of secondary flow in a circular tube fitted with vortex generator inserts determines its convective heat transfer intensity.
分 类 号:TK124[动力工程及工程热物理—工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38