检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:闫鹏[1] 刘敏 YAN Peng;LIU Min(Xilinguole Vocational College,Xilinhaote 026000,China;Shenhua North Power Shengli Energy Co.,Ltd.,Xilinhaote 026000,China)
机构地区:[1]锡林郭勒职业学院,内蒙古锡林浩特026000 [2]神华北电胜利能源有限公司,内蒙古锡林浩特026000
出 处:《热加工工艺》2020年第17期121-123,127,共4页Hot Working Technology
摘 要:采用不同的始锻温度、终锻温度和锻造变形量进行了机械轴承用铝合金Al-10Si-3Cu-0.5In-0.4Ce成形,并进行了室温和高温耐磨损性能的测试与分析。结果表明:随始锻温度、终锻温度和锻造变形量的增加,合金的室温和高温磨损体积先减小后增大,室温和高温耐磨损性能均先提高后下降。合金的锻造工艺参数优选为:450℃始锻温度、360℃终锻温度、30%变形量。The Al-10 Si-3 Cu-0.5 In-0.4 Ce Al alloy for mechanical bearing was formed by using different initial forging temperature,final forging temperature and forging deformation,and the wear resistance at room and high temperature was tested and analyzed.The results show that with the increase of initial forging temperature,final forging temperature and forging deformation,the wear volume at room temperature and high temperature decreases first and then increases,and the wear resistance at room temperature and high temperature increases first and then decreases.The forging process parameters of the alloy are optimized as follows:initial forging temperature of 450℃,final forging temperature of 360℃and deformation of 30%.
关 键 词:机械轴承 始锻温度 终锻温度 锻造变形 磨损性能
分 类 号:TG316[金属学及工艺—金属压力加工] TG146.21[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28