基于LabVIEW冷原子喷泉钟控制系统的研制  

Development of Cold Atomic Fountain Clock Control System Based on LabVIEW

作　　者：刘昆[1] 陈伟亮[1] 宋文霞 房芳[1] 戴少阳 刘年丰[1] 李天初[1] LIU Kun;CHEN Weiliang;SONG Wenxia;FANG Fang;DAI Shaoyang;LIU Nianfeng;LI Tianchu(National Institute of Metrology,Beijing 100029,China)

机构地区：[1]中国计量科学研究院,北京100029

出　　处：《计量科学与技术》2020年第8期3-7,共5页Metrology Science and Technology

基　　金：国家重点研发计划(2016YFF0200202)。

摘　　要：在工控机、NI相关板卡和外围自制电路的硬件基础上,利用LabVIEW开发了冷原子喷泉钟控制软件,实现冷原子喷泉钟的时序控制、信号采集和频率锁定。软件利用多重循环、事件驱动的队列状态机和生产者-消费者结构等设计,保证了界面控件响应迅速,程序扩展性好。Based on the hard ware,including industrial PC,NI output boards,and homemade peripheral circuit,the cold atomic fountain clock control software was developed using LabVIEW to realize the timing control,signal acquisition,and frequency lock of the cold atom fountain clock.The software makes use of multiple loops,event-driven queue state machines,and producer-consumer structures to ensure rapid response of interface controls and program extensibility.

关 键 词：冷原子喷泉钟 控制系统 LABVIEW 控制软件 

分 类 号：TH714.14[机械工程—测试计量技术及仪器]