页岩水平井套管的有限元模拟研究  

Finite element simulation of casing of horizontal well

作　　者：王扬 王萍[2] 肖钦萍 毕刚[2] WANG Yang;WANG Ping;XIAO Qinping;BI Gang(College of Mechanical Engineering,Xi'an Shiyou University,Xi'an Shaanxi 710065,China;College of Petroleum Engineering,Xi'an Shiyou University,Xi'an Shaanxi 710065,China;Aerosun Corporation,Nanjing Jiangsu 211100,China)

机构地区：[1]西安石油大学机械工程学院,陕西西安710065 [2]西安石油大学石油工程学院,陕西西安710065 [3]航天晨光股份有限公司,江苏南京211100

出　　处：《石油化工应用》2020年第10期44-48,52,共6页Petrochemical Industry Application

基　　金：陕西省自然科学基础研究计划项目“苏里格气田水平井φ118mm井眼下φ88.9mm套管固井技术研究”,项目编号:2019JQ-403。

摘　　要：为了研究页岩水平井水平段套管的受力及应力分布情况,本文利用有限元软件,分别研究模拟了套管在温度、非均匀载荷和两种因素共同作用下三种情况的应力变化情况,研究表明:温度和非均匀载荷两种因素共同作用下套管模型的应力变化与温度和非均匀载荷单独作用下的套管模型应力变化存在显著差异。套管两端受力小,中间受力大,中间套管径向截面非均匀受力,套管因应力分布不均匀而产生椭圆变形。In order to study the stress and stress distribution of casing in horizontal section of shale horizontal well,this paper studies and simulates the stress changes of casing under three conditions of temperature,non-uniform load and two factors.The results show that the stress changes of casing model and single temperature and non-uniform load under two factors of temperature and non-uniform load.There are significant differences in the stress changes of casing model under single action.The forces on both ends of the casing are small,the forces in the middle are large,and the radial section of the middle casing is uneven.The elliptical deformation of casing is caused by the uneven stress distribution.

关 键 词：套管 有限元 温度 非均匀载荷 应力分布 

分 类 号：TE319[石油与天然气工程—油气田开发工程]