检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘明 Liu Ming(Lin Huan Zhong Li Power Plant Co.,LTD,Huaibei 235139)
出 处:《中阿科技论坛(中英文)》2020年第10期45-49,共5页China-Arab States Science and Technology Forum
摘 要:循环流化床锅炉燃烧温度低,床温区间范围小,一次风率变化范围有限等,燃烧调整手段和影响因素少,在低氮燃烧改造中,只要抓住布风板改造和分离器提效改造两个重点,实现NOx超低排放是比较容易的。四台锅炉及改造方案的对比研究表明:使布风板布风均匀,对不同煤种确定合适的一次风率,提高分离器入口烟气流速,确定适合的中心筒尺寸,从而提高分离器效率,使床温可控,是CFB(循环流化床)锅炉低氮燃烧改造的关键。CFB boiler combustion temperature is low,the range of bed temperature is small,the range of primary air rate is limited,combustion adjustment means and influencing factors are few,in the low-nitrogen combustion retrofit,as long as put focus on the transformation of the air distributor and the efficiency improvement of the separator,it is relatively easy to achieve ultra-low NOx emission.Through the comparative study of four boilers and retrofit schemes,it is shown that the key to the low-nitrogen combustion transformation of CFB boiler is to make the air distributor uniform,determine the appropriate primary air rate for different types of coal,improve the inlet flue gas velocity of separator and determine the appropriate size of center cylinder,so as to improve the efficiency of separator and make the bed temperature controllable.
关 键 词:循环流化床 NOx 超低排放 外置床 旋风分离器
分 类 号:TK01[动力工程及工程热物理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38