实验废液处理装备的模块化结构设计  

Modular structure design of equipment for waste liquid treatment

作　　者：朱勉顺 周骥平[1] 张键 徐钟林 李跃 居军 Zhu Mianshun;Zhou Jiping;Zhang Jian;Xu Zhonglin;Li Yue;Ju Jun(School of Mechanical Engineering,Yangzhou University,Jiangsu Yangzhou,225127,China;Jiangsu Clean-star Laboratory Environmental ProtectionTechnology Co.,Ltd.,Jiangsu Yangzhou,225127,China;Yangzhou TianHui Laboratory Equipment EnvironmentalProtection Engineering Co.,Ltd.,Jiangsu Yangzhou,225000,China)

机构地区：[1]扬州大学机械工程学院,江苏扬州225127 [2]江苏科仕达实验室环保科技有限公司,江苏扬州225127 [3]扬州天辉实验室装备环保工程有限公司,江苏扬州225000

出　　处：《机械设计与制造工程》2020年第11期39-43,共5页Machine Design and Manufacturing Engineering

摘　　要：基于实验室废液处理工艺的需求,对实验废液处理工艺装备结构组成进行了分析,应用模块化设计分析方法,进行实验废液处理装备的模块化设计。采用SolidWorks建立了废液处理装备模块支承结构的三维模型,在ANSYSWorkbench有限元环境下获得各模块的应力云图和位移云图,为模块化设计提供理论依据,提高装备模块化结构性能。分析结果表明,该模块化结构设计方案合理,满足要求。Based on the actual requirements of manufacturing and installation of equipment for waste liquid treatment process,the structural composition of the experimental waste liquid processing equipment is analyzed,and the modular design analysis method is taken for modular design of experimental waste liquid processing equipment.SolidWorks is used to establish a three-dimensional model of the support structure of the waste liquid treatment equipment module,and the stress cloud diagram and displacement cloud diagram of each module are obtained under the finite element environment of ANSYS Workbench,which enhances the safety performance of the equipment structure.The analysis results show that the modular structure design is reasonable and meets the performance requirements.

关 键 词：实验废液处理 过程装备 模块化 结构设计 

分 类 号：TB21[一般工业技术—工程设计测绘]