微小盲孔动压磨料流体研抛加工区域仿真研究  

Simulation Study on Machining Area of Micro Blind Hole With Dynamic Pressure Abrasive Fluid

作　　者：丁建华 朱洪涛[1] 王明佳 黎明河 王国宁 张锟 Ding Jianhua;Zhu Hongtao;Wang Mingjia;Li Minghe;Wang Guoning;Zhang Kun(School of Mechanical Engineering,Shandong University,Jinan 250061,China;不详)

机构地区：[1]先进射流工程技术研究中心山东大学高效洁净机械制造教育部重点实验室机械工程国家级实验教学示范中心(山东大学)山东大学机械工程学院,济南市250061

出　　处：《工具技术》2020年第11期26-31,共6页Tool Engineering

基　　金：装备部十三五预研项目(41423020201);山东省自然科学基金重大基础研究(ZR2018ZB0521)。

摘　　要：介绍了微小盲孔内表面磨料两相流体研抛加工原理,基于流体动压润滑原理、Realizable k-ε双方程模型湍流模型和mixture多相流模型,建立了微小盲孔内表面动压磨料流体研抛加工中研抛磨头与微小盲孔内表面加工区域流体动压力的三维模型。应用ANSYS-Fluent流体动力学软件对流体动力学压力进行求解,结果表明:流体动压力随研抛磨头转速的增大而增大,随研抛磨头直径的增大而增大,随研抛磨头与微小盲孔内表面之间间隙的增大而减小。压力峰值发生在最小间隙区域,当间隙逐渐变大时,峰值区域逐渐前移并且变宽;在研抛磨头浸入微小盲孔方向,除边缘处有测泄外,流体动压力相同。Based on Navier-stokes equation and fluid continuity equation,a three-dimensional model of the hydrodynamic force in the grinding head and the machining area of the inner surface of the micro blind hole is established.The results show that the hydrodynamic pressure increases with the increase of the rotating speed of the grinding head,increases with the increasing of the grinding head diameter,and decreases with the increasing of the gap between the grinding head and the inner surface of the micro blind hole.The peak pressure occurs in the minimum gap area.When the gap becomes larger,the peak area gradually moves forward and widens.When the grinding head is immersed in the direction of small blind hole,the hydrodynamic pressure is the same except for the leakage at the edge.

关 键 词：微小盲孔 流体动压力 磨料流体 数值模拟 

分 类 号：TG580.692[金属学及工艺—金属切削加工及机床] TH161[机械工程—机械制造及自动化]