静电纺丝射流不稳定段的理论分析  

Theoretical Analysis of Unstable Segments of Electrospinning Jet

作　　者：陆利 梁志勇[1] LU Li;LIANG Zhiyong(College of Science,Donghua University,Shanghai 201620,China)

机构地区：[1]东华大学理学院,上海201620

出　　处：《东华大学学报（自然科学版）》2020年第5期840-845,850,共7页Journal of Donghua University(Natural Science)

基　　金：国家自然科学基金资助项目(51373033,11172064)。

摘　　要：着重研究静电纺丝射流鞭打的物理模型,即溶剂挥发与蒸汽压差、流量、射流直径和总长度之间的物理模型,分析溶剂挥发速率和相对湿度对纤维直径的影响;采用Jeffreys模型和Voigt模型分别描述不稳定段开始端和末端的黏弹性模型;构建不稳定段动力学模型并得出耦合控制方程,对静电纺丝工艺开发具有一定的理论指导意义。The physical model of electrospinning jet whipping was studied,which was the physical model between solvent volatilization and vapor pressure difference,flow rate,jet diameter and total length.The effects of solvent volatilization rate and relative humidity on fiber diameter were analyzed.The Jeffreys model and Voigt model were used to describe the viscoelastic model of the beginning and end of the unstable segment respectively.The dynamic model of the unstable segment is constructed and the coupling control equation is obtained,which has certain theoretical guiding significance for the development of the electrospinning process.

关 键 词：静电纺丝 黏弹性行为模型 溶剂挥发 相对湿度 Jeffreys模型 

分 类 号：O361.6[理学—流体力学]