基于NFS的Linux内核与根文件系统调试平台的配置  

NFS Linux kernel and root file system debugging platform configuration

作　　者：谢逸轩 马维华[1] Xie Yixuan;Ma Weihua(College of Computer Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 211100,China)

机构地区：[1]南京航空航天大学计算机科学与技术学院,江苏南京211100

出　　处：《无线互联科技》2020年第18期37-39,共3页Wireless Internet Technology

摘　　要：传统嵌入式Linux系统移植时,采用交叉编译并利用仿真器、串口或TF卡将宿主机编译的二进制文件烧录至开发板上进行调试。而移植开发往往伴随着反复的修改和测试,文章介绍的基于NFS的开发调试方法可在很大程度上便利研究开发人员,免去仿真器的昂贵成本以及反复插拨TF卡的烦琐操作,提高开发效率。文末附有配置的常见误区与对策。When the traditional embedded Linux system is transplanted,the binary files compiled by the host computer are burned to the development board by using the emulator,serial port or TF card for debugging.The transplant development is often accompanied by repeated modification and testing.The NFS based development and debugging method introduced in this paper can greatly facilitate the research and development personnel,avoid the expensive cost of the simulator and the cumbersome operation of repeatedly inserting TF cards to improve development efficiency.At the end of the paper,the common misunderstandings and countermeasures of configuration are attached.

关 键 词：NFS配置 U-BOOT LINUX移植 

分 类 号：TP316.81[自动化与计算机技术—计算机软件与理论]