检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:殷琳 楼梦麟[2,3] 康帅[5] YIN Lin;LOU Menglin;KANG Shuai(School of Civil and transportation Engineering, Ningbo University of Technology, Ningbo 315000, Zhejiang, China;School of Civil Engineering, Tongji University, Shanghai 200092, China;Tongji Zhejiang College, Jiaxing 314051, Zhejiang, China;Zhejiang Research Center of Civil Engineering Industrialized Building Construction Technology,Ningbo University of Technology,Ningbo 315000, Zhejiang, China;School of Civil Engineering and Architecture, Henan University, Kaifeng 475001, Henan, China)
机构地区:[1]宁波工程学院建筑与交通工程学院,浙江宁波315000 [2]同济大学土木工程学院,上海200092 [3]同济大学浙江学院,浙江嘉兴314051 [4]宁波工程学院,浙江省土木工程工业化建造工程技术研究中心,浙江宁波315000 [5]河南大学土木工程学院,河南开封475001
出 处:《地震工程学报》2020年第6期1409-1416,1453,共9页China Earthquake Engineering Journal
基 金:浙江省教育厅科研资助项目(Y201533463);王宽诚教育基金资助;广东省滨海土木工程耐久性重点实验室开放基金资助(GDDCE16-03)。
摘 要:通过二维数值计算,讨论合理建立阻尼矩阵对高重力坝时域内进行地震反应计算的重要性。首先,以4个不同坝高的混凝土重力坝为计算对象,将三种地震波作为水平输入,解得6种不同的阻尼矩阵形式下坝体的地震反应。然后以频域内解为标准,研究各种阻尼矩阵的合理性。研究结果表明:坝高超过250 m高的重力坝在时域内进行的地震反应计算是长周期系统的动力分析问题,应重视阻尼矩阵的建模方式,不宜采用单频率参数的质量比例阻尼矩阵和刚度比例阻尼矩阵,应采用双频率参数的Rayleigh阻尼矩阵,在确定2个频率参数时除采用坝体基频外还应考虑激振地震波的频谱特性以获得合理的坝体地震反应计算结果。In this paper,we use two-dimensional numerical analysis to study the importance of establishing a reasonable damping matrix in the seismic response analysis of high-gravity dams in the time domain.First,we selected four high-gravity dams of different heights as examples and determined their seismic responses under horizontal excitation by three seismic waves using six different damping matrices.Then,the reasonability of the different damping matrices was assessed by comparing their solutions in the frequency domain.The results indicate that the seismic response in the time domain of a gravity dam with a height greater than 250 m is a dynamic analysis problem of a long-period system,and attention should be paid to the approach used to model the damping matrix.In this case,we suggest using a Rayleigh damping matrix with two frequency parameters rather than a mass-proportional damping matrix or a stiffness-proportional damping matrix with one frequency parameter.To accurately analyze the seismic responses of a dam,both the fundamental frequency of the dam and the frequency characteristics of the input seismic wave should be considered.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7