排土机排料臂拓扑优化设计  

Topological Optimization Design of Discharging Arm of Spreader

作　　者：霍鹏亮 寇保福[1] 王志霞[1] 吴凤彪 Huo Pengliang;Kou Baofu;Wang Zhixia;Wu Fengbiao(College of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China)

机构地区：[1]太原科技大学机械工程学院,太原030024

出　　处：《煤矿机械》2020年第12期119-122,共4页Coal Mine Machinery

基　　金：山西省科技重大专项(20181101017);山西省重点研发计划(指南)项目国际合作专项(201803D421041)。

摘　　要：以排土机排料臂为研究对象,利用SolidWorks建立模型,在ANSYS Workbench软件中进行了有限元分析,发现现有排料臂虽满足机械性能要求,但应力分布不均匀。以受载最恶劣工况为约束条件,质量为目标函数,对排料臂架进行了拓扑优化。优化结果表明:同样的载荷工况下,与优化前臂架相比,最大变形量几乎未变,最大应力值虽增加但在安全范围之内,且各区段应力分布均匀。优化之后排料臂质量较之前减少了4.1%。研究结果为排料臂结构合理性设计提供了理论指导。Taking the discharging arm of the spreader as the research object, using SolidWorks to establish the model, finite element analysis was conducted in the ANSYS Workbench software, and it was found that although the existing discharging arm meets the mechanical performance requirements, the stress distribution is uneven. The topological optimization of the discharging arm was carried out with the worst conditions under load as constraints and quality as the objective function. The optimization results show that under the same load conditions, the maximum deformation is almost unchanged compared with the arm before optimization. Although the maximum stress value increases, it is within the safe range, and the stress distribution of each section is even. After optimization, the quality of the discharging arm was reduced by 4.1% compared with before. The research result provides theoretical guidance for the rational design of the discharging arm structure.

关 键 词：排土机 排料臂 拓扑优化 ANSYS Workbench 

分 类 号：TD422[矿业工程—矿山机电]