检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王鑫永 王锡勇[2] 章杨松[1] 李晓昭[3] 许文涛 WANG Xinyong;WANG Xiyong;ZHANG Yangsong;LI Xiaozhao;XU Wentao(Department of Civil Engineering,Nanjing University of Science and Technology,Nanjing 210094,China;CNNC Beijing Research Institute of Uranium Geology,Beijing 100029,China;School of Earth Sciences and Engineering,Nanjing University,Nanjing 210093,China)
机构地区:[1]南京理工大学土木工程系,江苏南京210094 [2]中核集团核工业北京地质研究院,北京100029 [3]南京大学地球科学与工程学院,江苏南京210093
出 处:《防灾减灾工程学报》2020年第5期789-795,共7页Journal of Disaster Prevention and Mitigation Engineering
基 金:国防部科技重点项目(科工二司[2015]297号)资助。
摘 要:在高放核废料的处置中,掌握地下水在裂隙岩体中的渗流规律是当下的关键问题。以甘肃北山岌岌槽一测区为工程背景,通过现场数据测得的裂隙统计参数,应用编制的MATLAB语言程序生成全局域内的离散裂隙网络模型,将三维裂隙以圆盘模拟并简化为变截面圆管单元渗流网络,为考虑边缘效应以圆管作为单元体切割基准。通过比较随单元体尺寸增大的三个方向上的等效渗透系数变化趋势得到表征单元体REV,并在该单元体中计算渗透张量以及应用Dijkstra算法识别对应边界方向的最优路径。结果表明:该测区的渗透系数最值分别为3.62e-6m/s与9.19e-7m/s,水平向渗透性最小,竖直向附近最大,基本符合工程实际。In the disposal of high-level nuclear waste,mastering the seepage law of groundwater in fractured rock mass is a key issue at present. With the engineering background of a surveying area in Gansu Beishan,the discrete fracture network model in the global domain was generated using the MATLAB code based on the statistical parameters of fracture properties measured by field data. The three-dimensional disc-shaped fractures are modeled and simplified as channel element network with variable cross-sections,and each channel element is cut in the research cube for the consideration of the edge effect. Then the Representative Element Volume(REV)is characterized by comparing the trend of the equivalent permeability coefficient in three directions which changes as the size of research cube is getting larger;the permeability tensor is calculated and the optimum path of the corresponding boundary direction is recognized by use of the improved Dijkstra algorithm in this REV cell. The results show that the maximum and minimum values of the permeability coefficient of the measured area are 3.62 e-6 m/s and 9.19 e-7 m/s,respectively,which has the lowest permeability in horizontal plane and the highest one around the vertical direction,and this results are basically in line with the actual project. All these programming ideas and simulation results can provide a reference for solving related engineering problems.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.135.220.9