SiC泡沫陶瓷增强ZL205A铝合金复合材料的制备与性能  

Preparation and Mechanical Properties of ZL205A Alloy-Infiltrated SiC Foam Ceramic Composites

作　　者：綦育仕 汪彦博 杜兰君 费岩晗 杜之明[1] Qi Yushi;Wang Yanbo;Du Lanjun;Fei Yanhan;Du Zhiming(School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;Shanghai Spaceflight Precision Machinery Institute,Shanghai 201600,China;Beijing Aerospace Propulsion Institute,Beijing 100076,China)

机构地区：[1]哈尔滨工业大学材料科学与工程学院,黑龙江哈尔滨150001 [2]上海航天精密机械研究所,上海201600 [3]北京航天动力研究所,北京100076

出　　处：《稀有金属材料与工程》2020年第11期3741-3747,共7页Rare Metal Materials and Engineering

摘　　要：通过挤压浸渗工艺成功制备了SiC泡沫陶瓷增强ZL205A铝合金复合材料,并研究了不同孔隙率的泡沫陶瓷增强相对复合材料性能的影响。通过微观结构分析,制备的复合材料两相间结合紧密,没有裂纹及其他缺陷产生。多孔陶瓷作为增强相可以有效地细化ZL205A合金的晶粒,多孔陶瓷孔隙率降低,孔结构越小,合金晶粒越细小。对制备的复合材料进行力学性能测试,复合材料的硬度(HV)和抗弯强度最高能够达到1276 MPa和415 MPa。对制备的复合材料进行摩擦磨损测试。结果表明,连续陶瓷相的存在将铝基体严重的粘着磨损和剥落磨损转变为较轻的磨粒磨损,极大提升了复合材料的摩擦磨损性能,为其用于耐磨领域提供了理论依据。ZL205A alloy-infiltrated SiC foam ceramic composites were prepared by extrusion infiltration process.The effect of different porosity of SiC foam ceramic on the properties of the composites was investigated.The results show that the prepared SiC foam ceramics are tightly combined with the ZL205A matrix material,and there are few cracks an d other defects can be observed.The SiC foam ceramic as the reinforcing phase refines the grains of the ZL205A matrix phase.The pore structure and the grain size are finer and smaller with the decrease of reinforcing phase porosity.The mechanical properties of the ZL205A alloy-infiltrated SiC foam ceramic composites were investigated.The hardness(HV)and flexural strength of the composites are 1276 MPa and 415 MPa,respectively.The wear resistance of the composites was also investigated.The results demonstrate that the addition of ceramic reinforcing phase can effectively transform the severe adhesive wear and spalling wear of the matrix phase into lighter abrasive wear,which greatly improves the friction and wear properties of the composites.

关 键 词：SiC泡沫陶瓷 ZL205A铝合金 挤压浸渗工艺 

分 类 号：TB333[一般工业技术—材料科学与工程]